HD01335: PMG / REMOVE ONE HOLE ON MACHINING PATTERN REMOVE ALL HOLES .

APAR status

• Closed as program error.

Error description

• PMG / REMOVE ONE HOLE ON MACHINING PATTERN REMOVE ALL HOLES
  .
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
     REMOVE ONE HOLE ON MACHINING PATTERN REMOVE ALL HOLES .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 11 GA level.
  
   INCIDENT DIAGNOSIS:
     REMOVE ONE HOLE ON MACHINING PATTERN REMOVE ALL HOLES .
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
     In fact, we did not remove all holes, we removed
     all "linked" positions.
     For exemple, if a Design Pattern is selected, all its
     positions are linked. It's the same geometry link.
     So, the option 'Remove Position' removes this
     link. It was the "good" behavior.
     In order to allow removing only one point, a
     new functionnality was added.
     It's label is : "Remove Current Position".
     It allow to remove only the position selected.
     The old functionnality has been kept. Its new label
     is "Remove linked Positions"
  
   ANSWER AND POSSIBLE BY-PASS:
     No by pass
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R509 PSN

     UP

• R510 PSN

     UP