HD01239: UPDATING A DRAWING OF PART CAUSES VIEW TO MOVE LOCATION

APAR status

• Closed as documentation error.

Error description

• ABSTRACT:
  =========
  UPDATING A DRAWING OF PART CAUSES VIEW TO MOVE LOCATION
  .
  SCENARIO:
  =========
  1- Open 3D mdl and drawing related to PMR
  2- Activate CATPart
  3- Double-click on pad.2 (red) and change length for 15 in.
  4-Click ok
  5-Activate drawing and update
  .
  RESULT:
  =======
   Front view has move
  

Local fix

Problem summary

•  PROBLEM SUMMARY:
  UPDATING A DRAWING OF PARTS CAUSES VIEW TO MOVE LOCATION
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN CATIA DOCUMENTATION
  DELIVERED WITH CATIA VERSION 5 RELEASE 11
  NOTE THAT DOCUMENTATION WILL ALSO BE INCLUDED IN V5R10SP02
  
   DOCUMENTATION REFERENCE:
     MANUAL     ===>.Generative drafting
     CHAPTER    ===>.Basic Tasks -> View Creation
     PAGE       ===>.Before You Begin
  
   MODIFICATION:
     ====>.Generative views are positioned according to the
     ====>.center of gravity of the 3D part. If you modify a 3D
     ====>.part in such a way that the center of gravity of the
     ====>.part changes, then, when updating the view, the
     ====>.position of the view will be re-computed according
     ====>.to the new center of gravity of the part and will be
     ====>.modified accordingly.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels