APAR status
Closed as unreproducible in next release.
Error description
LMG / PROFILE FINISHING : DISPLAY PROBLEM IN LOCAL INVERT TAB . . Invert Lift-off angle and radius are superimposed . . mc 03$ INTEG(Y/N): N P ROD: ...... LEV: ....... COMPAT(D/A): . SOL: ........... WORKSHOP: LATHM ACH COMMAND: PROFILE FINISHING....... ............ OPERATING SYSTE M: W2 OPERATING SYSTEM LEVEL: ................ ......... SERVICE PACKAGE REQUEST (Y/N): Y AT LEVEL: SP3 REGRESSION (Y/N): N FROM LEVEL/SP LEVEL: ..... / ........ STATUS REQUEST (Y/N): Y ELECTRONIC FILE (Y/N): Y ATTACHED MATERIAL (Y/N): N FILENAME: 64948742.073A GIF FILE....................................... MAIL, E-MAIL OR FAX (Y/N): . ADDRESS OR FAX NUMBER: ............... 64948742.073B IMAGE FILE sent 09/12/02............................... HARDWARE DESCRIPTION: ................................................. CD/LOOP(Y/N): . PERFO(Y/N): . FUNCSEG(Y/N): . PROJ: ................... ABSTRACT: PANEL IN LMG DOES NOT DISPLAY CORRECTLY...................... ................................................................ +CATSERV -569151000 -L16U/USEPLM-P4S4-02/08/26-15:28 -CE ***X1S2R3V4 PLM DEFECT SUPPORT ONLY *** Valid for defect support only on the product selected *** Ensure the product in the PMR header matches the one reported below *** Customer will monitor PMR for updates *** *** FAX Number: *** E-Mail: vincent.brouillet@pwc.ca *** Abstract: Profile finishing +local inverse parameter are piled . Operating System: WindowsNT V4 SP5 Product Group: CATIA V5R9 ServicePack 1 or below on WinNT Area Affected: LMG Showstopper: NO Regression: YES Regression from: v5r8 Recommended Fixes Installed: YES . Environment: For Client/Server type products Client OS level _______ Associated software and level (e.g. browser) _____ Server OS Level _______ Associated software and level (WebServers, DBs) _____ ------------------------------------------------ . Problem: In LMG Profile Finishing , on the option tab local invert, two parameters appears piled one over the other making the selection difficult Over to NC queue per Mark. NO CONTACT IS REQUIRED under investigation . I do not see a problem here on V5R9. Please look at 48742.gif in FTP site /xxxxxx/fromibm -SYSTEM GENERATED TEXT--569151000 -POCID=BDC -------02/09/03-05:49 - PROBLEM WAS INACTIVE FOR MORE THAN 07 DAYS -- CALL GENERATED -SYSTEM GENERATED TEXT--569151000 -POCID=BDC -------02/09/11-05:48 - PROBLEM WAS INACTIVE FOR MORE THAN 07 DAYS -- CALL GENERATED +CATSERV - -L16U/USEPLM-P4S4-02/09/11-18:24 SCE *** Electronic update by customer *** Additional Information: I sent you a picture of what I obtain. It is when I set invert liftoff type to circular that I get this situation. See picture for example Sending to NC work queue. Hello DS . We have sent you .gif file64948742.073A . Problem: In LMG Profile Finishing , on the option tab local invert, two parameters appears piled one over the other making the selection difficult . Please look at gif file and advise T=CDS$$ <= The Fil e is available under: AIX.: / s/maint5/db/c649/pmr64948742.073 Best Re gards, Christophe DENIS. Receive d additional image file Send to DS NO CON TACT IS REQUIRED HELLO DS . We have sent you 64948742.073B image file . Please look at this file to understand problem Update From ROJAT Benoit ==> $$RSPMNT=BRJ$$ <= Update for Dassault Systemes Material Unloading Team : Hello Chris, Some material must have been sent with the PMR. It either was not unloaded or has been archived now. Can you please unload this material. Best regards, Benoit . ==> $$RSPMNT=FRV$$ <== Update From ROJAT Benoit ==> $$RSPMNT=BRJ$$ <= Thanks for additional info. . Regards, Benoit . ==> $$RSPMNT=FRV$$ <== Update From DENIS Christophe ==> $$RSPMNT=CDS$$ <= The File is available under: AIX.: /s/maint5/db/c649/pmr64948742.073 Best Regards, Christophe DENIS. -SYSTEM GENERATED TEXT--569151000 -POCID=RS4 -------02/09/21-11:18 - PROBLEM WAS INACTIVE FOR MORE THAN 07 DAYS -- CALL GENERATED -SYSTEM GENERATED TEXT--569151000 -POCID=RS4 -------02/09/29-01:43 - PROBLEM WAS INACTIVE FOR MORE THAN 07 DAYS -- CALL GENERATED -SYSTEM GENERATED TEXT--569151000 -POCID=RS4 -------02/10/07-02:04 - PROBLEM WAS INACTIVE FOR MORE THAN 07 DAYS -- CALL GENERATED Hello DS . Please provide status on this pmr. We have had no response in 30 days. Update From RIVE Florence ==> $$RSPMNT=FRV$$ <= -SYSTEM GENERATED TEXT--569151000 -POCID=RS4 -------02/10/23-02:12 - PROBLEM WAS INACTIVE FOR MORE THAN 07 DAYS -- CALL GENERATED -SYSTEM GENERATED TEXT--569151000 -POCID=RS4 -------02/10/31-02:10 - PROBLEM WAS INACTIVE FOR MORE THAN 07 DAYS -- CALL GENERATED -SYSTEM GENERATED TEXT--569151000 -POCID=RS4 -------02/11/08-02:29 - PROBLEM WAS INACTIVE FOR MORE THAN 07 DAYS -- CALL GENERATED Hello DS . Please provide status on this pmr. We have had no response in 60 days!
Local fix
Problem summary
INCIDENT DIAGNOSIS: LMG / PROFILE FINISHING : DISPLAY PROBLEM IN LOCAL INVERT TAB .
Problem conclusion
Temporary fix
Comments
THE PROBLEM WAS SUBMITTED ON : CATIA VERSION 5 RELEASE 9 . THIS PROBLEM IS NOT REPRODUCIBLE ON : CATIA VERSION 5 RELEASE 11 GA level INCIDENT DIAGNOSIS: LMG / PROFILE FINISHING : DISPLAY PROBLEM IN LOCAL INVERT TAB . REASON: problem already corrected
APAR Information
APAR number
HD00927
Reported component name
CATIA V5/NT/200
Reported component ID
569151000
Reported release
509
Status
CLOSED UR1
PE
NoPE
HIPER
NoHIPER
Special Attention
NoSpecatt
Submitted date
2002-11-19
Closed date
2002-11-29
Last modified date
2006-06-27
APAR is sysrouted FROM one or more of the following:
APAR is sysrouted TO one or more of the following:
Fix information
Fixed component name
CATIA V5/NT/200
Fixed component ID
569151000
Applicable component levels
R509 PSN
UP
R510 PSN
UP
[{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSVJ2K","label":"CATIA V5"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"509","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
Document Information
Modified date:
27 June 2006