HC97155: PMG / UPDATE IN DESIGN IS NOT DETECTED AND TOOLPATH IS REPLAYED AT THE OLD POSITION.

APAR status

• Closed as program error.

Error description

• PMG / UPDATE IN DESIGN IS NOT DETECTED AND TOOLPATH IS
  REPLAYED AT THE OLD POSITION.
  .
  

Local fix

Problem summary

•  INCIDENT DIAGNOSIS:
  The machining operations do not show a Tornado after
  moving one of the part of the product by modification
  of one of the constraint.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON
    CATIA VERSION 5 RELEASE 10 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R9SP03.
  
   INCIDENT DIAGNOSIS:
  The machining operations do not show a Tornado after
  moving one of the part of the product by modification
  of one of the constraint.
  
   TECHNICAL EXPLANATION FOR THE CORRECTION:
  This modification is not systematicaly detected.
  
   ANSWER AND POSSIBLE BY-PASS:
  BY-PASS: edit the part op and reselect the product.
  Answer: Detect corretly the modification and
  impact the right machining operations.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    FILE
  

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R508 PSN

     UP

• R509 PSN SP50903

     UP02/09/25 N 1000