HD60927: ASMD : SKETCH : SKETCH CONSTRAINTS FAILS ON EDITING A SKETCH FR OM WEB CREATED ON R12

APAR status

• Closed as Permanent restriction.

Error description

• ASMD : SKETCH : SKETCH CONSTRAINTS FAILS
  ON EDITING A SKETCH FROM WEB CREATED ON
  R12
  .
  SCENARIO:
  1- Open provided CATPart.
  2- Activate AeroSpace Sheetmetal Workbench.
  3- Edit Sketch.1 into Web.1. Sketcher workbench
  appears.
  4- Create and delete a point.
  5- Exit from Sketch.
  6- Update is necessary.
  .
  OBSERVATION
  This sketch is either over-constrained or
  inconsistent. Prior to editing this sketch, you can
  use Tools>Sketch Analysis>Diagnostic to know
  which sketch element causing troubles.
  .
  

Local fix

Problem summary

• ASMD : SKETCH : SKETCH CONSTRAINTS FAILS ON EDITING A SKETCH FR
  OM WEB CREATED ON R12
  ASMD : SKETCH : SKETCH CONSTRAINTS FAILS
  ON EDITING A SKETCH FROM WEB CREATED ON
  R12
  .
  SCENARIO:
  1- Open provided CATPart.
  2- Activate AeroSpace Sheetmetal Workbench.
  3- Edit Sketch.1 into Web.1. Sketcher workbench
  appears.
  4- Create and delete a point.
  5- Exit from Sketch.
  6- Update is necessary.
  .
  OBSERVATION
  This sketch is either over-constrained or
  inconsistent. Prior to editing this sketch, you can
  use Tools>Sketch Analysis>Diagnostic to know
  which sketch element causing troubles.
  .
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN
  CATIA
  .
  Incident Diagnosis
  Sketch constraint fails on update
  .
  Restriction Explanation
  Problem already handled.
  .
  By-Pass
  None
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels