HD59873: GSD : ERROR MESSAGE WHEN CREATING ISOPARAMETER WITH POINT ON BO UNDARY

APAR status

• Closed as program error.

Error description

• GSD : ERROR MESSAGE WHEN CREATING
  ISOPARAMETER WITH POINT ON BOUNDARY
  .
  1) Open .CATPart
  2) Select the Isoparametric Curve function on GSD
  3) Select Sweep.1 as Support
  4) Select (in the Specification Tree) Point.1 as Point
  and Line.1 as Direction.
  Error Message shown
  .
  

Local fix

Problem summary

• GSD : ERROR MESSAGE WHEN CREATING ISOPARAMETER WITH POINT ON BO
  UNDARY
  GSD : ERROR MESSAGE WHEN CREATING
  ISOPARAMETER WITH POINT ON BOUNDARY
  .
  1) Open .CATPart
  2) Select the Isoparametric Curve function on GSD
  3) Select Sweep.1 as Support
  4) Select (in the Specification Tree) Point.1 as Point
  and Line.1 as Direction.
  Error Message shown
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP04 AND V5R16SP09.
  .
  Incident Diagnosis
  Isoparam curve was not getting created when user
  selects input point as point on boudary of the
  support.
  .
  Correction Explanation
  The case of Point lying geometrically on support
  was not handled correctly.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX

• Fixed component ID

  569101000

Applicable component levels

• R516 PSN

     UP

• R517 PSN SP51704

     UP07/02/27 I 1000