HD59787: MACHINING (PMPA) / GLOBAL FEATURE RECOGNITION : AXIS OF THE HOL E IS NOT RECOGNIZED CORRECTLY

APAR status

• Closed as program error.

Error description

• Machining (PMPA) / GLOBAL FEATURE
  RECOGNITION : AXIS OF THE HOLE IS NOT
  RECOGNIZED CORRECTLY
  .
  SCENARIO
  .
  1. Open CATProcess
  2. Run MPA Global feature recognition in
  Manufacturing. Select the body as Entity to
  recognize
  3. Set hole as feature enable tap holes and
  automatic merge
  4. Select the top surface as direction reference in
  the advanced tab page
  5. Check mark Create features only in this
  direction
  6. No pattern creation
  7. Run the recognition
  8. Note that 2 holes are recognized
  9. And there is only one hole in this direction that
  may be manufactured from this side of the part.
  The second hole has to be recognized from the
  other side of the part. See doc file for pictures.
  .
  PROBLEM
  .
  Global feature recognition does not recognize the
  hole correctly, the axis of one hole is not correct.
  .
  EXPECTED RESULT
  .
  Hole should be correctly recognized with Global
  feature recognition.
  .
  

Local fix

Problem summary

• Machining (PMPA) / GLOBAL FEATURE RECOGNITION : AXIS OF THE HOL
  E IS NOT RECOGNIZED CORRECTLY
  Machining (PMPA) / GLOBAL FEATURE
  RECOGNITION : AXIS OF THE HOLE IS NOT
  RECOGNIZED CORRECTLY
  .
  SCENARIO
  .
  1. Open CATProcess
  2. Run MPA Global feature recognition in
  Manufacturing. Select the body as Entity to
  recognize
  3. Set hole as feature enable tap holes and
  automatic merge
  4. Select the top surface as direction reference in
  the advanced tab page
  5. Check mark Create features only in this
  direction
  6. No pattern creation
  7. Run the recognition
  8. Note that 2 holes are recognized
  9. And there is only one hole in this direction that
  may be manufactured from this side of the part.
  The second hole has to be recognized from the
  other side of the part. See doc file for pictures.
  .
  PROBLEM
  .
  Global feature recognition does not recognize the
  hole correctly, the axis of one hole is not correct.
  .
  EXPECTED RESULT
  .
  Hole should be correctly recognized with Global
  feature recognition.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN

     UP