HD59446: FTA (PART) / TOLERANCE ZONE CANNOT BE SELECTED FOR

APAR status

• Closed as program error.

Error description

• FTA (Part) / TOLERANCE ZONE CANNOT BE
  SELECTED FOR POSITIONAL TOLERANCE OF
  MULTIPLE TARGETS
  .
  Scenario:
  0) Start CATIA V5R16SP2.
  1) Open the file : "CATPart". WB : "Functional
  Tolerancing and Annotation".
  2) Expand "Geometrical Tolerances" on the
  tree. "Position.1" and "Position.2" are displayed on
  the tree.
  .
  // In case where the target is one. //
  3) Double-click "Position.2". (Please confirm that
  the target is one.) "Geometrical Tolerance" dialog
  box is displayed. "Tolerance Zone" tab can select.
  (This is the right behavior.)
  4) Click "Cancel".
  .
  // In case where the target is multiple. //
  5) Double-click "Position.1". (Please confirm that
  the target is multiple (Pattern)) ."Geometrical
  Tolerance" dialog box is displayed. "Tolerance
  Zone" tab can not select. This is problem.
  .
  .
  

Local fix

Problem summary

• FTA (Part) / TOLERANCE ZONE CANNOT BE SELECTED FOR
  POSITIONAL TOLERANCE OF MULTIPLE TARGETS
  FTA (Part) / TOLERANCE ZONE CANNOT BE
  SELECTED FOR POSITIONAL TOLERANCE OF
  MULTIPLE TARGETS
  .
  Scenario:
  0) Start CATIA V5R16SP2.
  1) Open the file : "CATPart". WB : "Functional
  Tolerancing and Annotation".
  2) Expand "Geometrical Tolerances" on the
  tree. "Position.1" and "Position.2" are displayed on
  the tree.
  .
  // In case where the target is one. //
  3) Double-click "Position.2". (Please confirm that
  the target is one.) "Geometrical Tolerance" dialog
  box is displayed. "Tolerance Zone" tab can select.
  (This is the right behavior.)
  4) Click "Cancel".
  .
  // In case where the target is multiple. //
  5) Double-click "Position.1". (Please confirm that
  the target is multiple (Pattern)) ."Geometrical
  Tolerance" dialog box is displayed. "Tolerance
  Zone" tab can not select. This is problem.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE
  FIXED ON V5R17SP04.
  .
  Incident Diagnosis
  .
  There was a computation error related to
  Tolerance zone availability, when selecting
  multiple targets (Pattern threads).
  .
  Correction Explanation
  .
  Correction has been provided to get the
  correct result of tolerance zone availability,
  when selecting multiple targets (Pattern
  threads).
  .
  Inorder to get the correction, part needs to
  updated.
  e.g. Edit Volume Extrude + OK
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R517 PSN SP51704

     UP07/02/27 I 1000