HD59411: INTEROP LCA - CV5 (EHA) LINKING BACKSHELL WITH CONNECTOR IN GBN BLACK BOX LEADS TO PUBLICATIONS EXPOSED AT BB LEVEL

APAR status

• Closed as program error.

Error description

• INTEROP LCA - CV5 (EHA) Linking backshell with
  connector in GBN black box leads to publications
  exposed at BB level
  .
  1) In ENOVIA LCA create a new PRC. Add a
  component assembly node under the PRC and load
  it in CATIA V5.
  2) In CATIA V5 create a new product under the
  opened component assembly node.
  3) Define the new product as a GBN
  - workbench Equipment & Systems / Electrical
  Harness Discipline / Electrical Harness Assembly
  - Select "Geometrical Bundle" icon, indicate the
  new created product to define it as GBN.
  4) Under the GBN node place a connector
  - Insert "Existing Component" and Select connector
  5) Under the GBN node place a backshell
  - Insert "Existing Component" and Select backshell
  6) In CATIA V5 Link the connector with the
  backshell
  - Change workbench to Equipment & Systems /
  Electrical Harness Discipline / Electrical Assembly
  Design
  - Select "Connect Electrical Devices" icon
  - Select connector and select backshell
  .
  At this stage the publication participating in the
  linking of the two components appear at the GBN
  level. This should not happen as the link is internal
  to the GBN black box.
  .
  

Local fix

Problem summary

• INTEROP LCA - CV5 (EHA) Linking backshell with connector in GBN
  black box leads to publications exposed at BB level
  INTEROP LCA - CV5 (EHA) Linking backshell with
  connector in GBN black box leads to publications
  exposed at BB level
  .
  1) In ENOVIA LCA create a new PRC. Add a
  component assembly node under the PRC and load
  it in CATIA V5.
  2) In CATIA V5 create a new product under the
  opened component assembly node.
  3) Define the new product as a GBN
  - workbench Equipment & Systems / Electrical
  Harness Discipline / Electrical Harness Assembly
  - Select "Geometrical Bundle" icon, indicate the
  new created product to define it as GBN.
  4) Under the GBN node place a connector
  - Insert "Existing Component" and Select connector
  5) Under the GBN node place a backshell
  - Insert "Existing Component" and Select backshell
  6) In CATIA V5 Link the connector with the
  backshell
  - Change workbench to Equipment & Systems /
  Electrical Harness Discipline / Electrical Assembly
  Design
  - Select "Connect Electrical Devices" icon
  - Select connector and select backshell
  .
  At this stage the publication participating in the
  linking of the two components appear at the GBN
  level. This should not happen as the link is internal
  to the GBN black box.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP04 .
  Bad management of instance refercne level so
  leads to extra publications                       517
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R517 PSN SP51704

     UP07/02/27 I 1000