HD59310: AS-SUPPORTED PRODUCT SPEC NOT EQUAL TO AS-DESIGNED P RODUCT SPEC AFTER VERSIONING AS-DESIGNED PRODUCT SPEC

APAR status

• Closed as unreproducible in next release.

Error description

• As-Supported Product Spec not equal to As-
  Designed            Product Spec after versioning As-
  Designed Product Spec
  .
  DESCRIPTION:
  1. Create an As-Designed Product Specification.
  2. Select the As-Designed Product Specification and
  RMB + New
  As-Supported Product Spec.
  3. Select the As-Designed Product Specification and
  RMB + Edit Filter Criteria.
  4. Select a Specification and define a Range -
  Range values and select OK.
  5. Select the As-Supported Product Specification
  and RMB + Edit Filter
  Criteria. Verify that the filter criteria is correct and
  select OK.
  6. Promote the As-Delivered Product Specification
  to Approved.
  7. Select the As-Delivered Product Specification
  and RMB + New Version.
  8. Select the new As-Delivered Product
  Specification and RMB + Edit
  Filter Criteria. Unselect a Specification, select
  another Specification, select Hide instances with
  unresolved Add operations and select OK.
  9. Select the As-Supported Product Specification
  and select Refresh Tree Under Selected Node.
  10. Select the As-Supported Product Specification
  and RMB + Edit Filter Criteria.
  .
  Expected results: The As-Supported filter criteria
  matches the As-Designed filter criteria.
  Actual results: The As-Supportedfilter criteria has
  the new version As-Designed filter criteria but the
  Hide instances with unresolved Add operations is
  not selected.
  .
  

Local fix

Problem summary

• As-Supported Product Spec not equal to As-Designed            P
  roduct Spec after versioning As-Designed Product Spec
  As-Supported Product Spec not equal to As-
  Designed            Product Spec after versioning As-
  Designed Product Spec
  .
  DESCRIPTION:
  1. Create an As-Designed Product Specification.
  2. Select the As-Designed Product Specification and
  RMB + New
  As-Supported Product Spec.
  3. Select the As-Designed Product Specification and
  RMB + Edit Filter Criteria.
  4. Select a Specification and define a Range -
  Range values and select OK.
  5. Select the As-Supported Product Specification
  and RMB + Edit Filter
  Criteria. Verify that the filter criteria is correct and
  select OK.
  6. Promote the As-Delivered Product Specification
  to Approved.
  7. Select the As-Delivered Product Specification
  and RMB + New Version.
  8. Select the new As-Delivered Product
  Specification and RMB + Edit
  Filter Criteria. Unselect a Specification, select
  another Specification, select Hide instances with
  unresolved Add operations and select OK.
  9. Select the As-Supported Product Specification
  and select Refresh Tree Under Selected Node.
  10. Select the As-Supported Product Specification
  and RMB + Edit Filter Criteria.
  .
  Expected results: The As-Supported filter criteria
  matches the As-Designed filter criteria.
  Actual results: The As-Supportedfilter criteria has
  the new version As-Designed filter criteria but the
  Hide instances with unresolved Add operations is
  not selected.
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  ENOVIA VERSION 5 RELEASE 17 SP1.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  ENOVIA VERSION 5 RELEASE 18 GA level AND ON
  V5R17SP04.
  PROBLEM IS ALSO NOT REPRODUCIBLE ON V5R17
  SP3.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  ENOVIA LCA NT>X

• Fixed component ID

  569151700

Applicable component levels

• R517 PSN SP51704

     UP07/02/27 I 1000