HD58859: CATIA V5 DOES NOT LOAD PARAMETERS, RELATIONS AND CONSTRAINTS AF TER SYNCHRONIZING DESIGN TABLE IN CATIA V5 AND SAVING IN VPM.

APAR status

• Closed as unreproducible in next release.

Error description

• CATIA V5 DOES NOT LOAD PARAMETERS,
  RELATIONS AND CONSTRAINTS AFTER
  SYNCHRONIZING DESIGN TABLE IN CATIA V5 AND
  SAVING IN VPM.
  SCENARIO:
  1)Import assembly in VPM (structure exposed
  mode) using FBDI.
  2)In 3DCOM search assembly, bookmark it and
  expand it to all level.
  3)Associate design table to the assembly node by
  right click ﾨ Associate ﾨ design table, browse to the
  design table saved in the file system.
  4)Expand assembly completely in 3DCOM.Open it
  in CATIA V5.
  5)In CATIA V5, expand relation, select design
  table, and edit-links;you will see that the link is
  pointing to the design table saved in the file system.
  6)If the design table is not synchronize then(green
  icon indicates its synchronized) Select design tableﾨ
  RMB-Design table object ﾨ synchronize.
  7)Save data back in 3DCOM using Save All function
  (we have tried all the commands of save).
  8)Again open assembly from 3DCOm to CATIAV5.
  9)Expand relations-design table (design table will
  have purple icon, indicating that design table does
  not have associations with parameters.).
  10)Re-associate design table to parameters.(if the
  association are there but design table is not
  synchronized then go to the step 12 directly).
  11)Synchronize design table.
  12)Save all in VPM.
  13)Again open assembly from 3DCOm to CATIAV5.
  14)Expand relations-design table (design table will
  have purple icon, indicating that design table does
  not have associations with parameters.)
  15)Re-associate design table to parameters.
  16)Synchronize design table.
  17)Save all in VPM.
  18)Again open assembly from 3DCOm to CATIAV5.
  .
  RESULT:Design table will have purple icon
  indicating that design table does not have
  associations with parameters.
  .
  

Local fix

Problem summary

• CATIA V5 DOES NOT LOAD PARAMETERS, RELATIONS AND CONSTRAINTS AF
  TER SYNCHRONIZING DESIGN TABLE IN CATIA V5 AND SAVING IN VPM.
  CATIA V5 DOES NOT LOAD PARAMETERS,
  RELATIONS AND CONSTRAINTS AFTER
  SYNCHRONIZING DESIGN TABLE IN CATIA V5 AND
  SAVING IN VPM.
  SCENARIO:
  1)Import assembly in VPM (structure exposed
  mode) using FBDI.
  2)In 3DCOM search assembly, bookmark it and
  expand it to all level.
  3)Associate design table to the assembly node by
  right click   Associate   design table, browse to the
  design table saved in the file system.
  4)Expand assembly completely in 3DCOM.Open it
  in CATIA V5.
  5)In CATIA V5, expand relation, select design
  table, and edit-links;you will see that the link is
  pointing to the design table saved in the file system.
  6)If the design table is not synchronize then(green
  icon indicates its synchronized) Select design table
  RMB-Design table object   synchronize.
  7)Save data back in 3DCOM using Save All function
  (we have tried all the commands of save).
  8)Again open assembly from 3DCOm to CATIAV5.
  9)Expand relations-design table (design table will
  have purple icon, indicating that design table does
  not have associations with parameters.).
  10)Re-associate design table to parameters.(if the
  association are there but design table is not
  synchronized then go to the step 12 directly).
  11)Synchronize design table.
  12)Save all in VPM.
  13)Again open assembly from 3DCOm to CATIAV5.
  14)Expand relations-design table (design table will
  have purple icon, indicating that design table does
  not have associations with parameters.)
  15)Re-associate design table to parameters.
  16)Synchronize design table.
  17)Save all in VPM.
  18)Again open assembly from 3DCOm to CATIAV5.
  .
  RESULT:Design table will have purple icon
  indicating that design table does not have
  associations with parameters.
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 16.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 18GA level AND ON
  V5R17SP03 and V5R16SP08.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN SP51608

     UP06/11/27 I 1000

• R517 PSN SP51703

     UP06/12/11 I 1000