HD58628: NCG / APT / CIRCLE DRIVEN INCORRECTLY WHEN TRACUT IS

APAR status

• Closed as program error.

Error description

• NCG / APT / CIRCLE DRIVEN INCORRECTLY WHEN
  TRACUT IS APPLIED
  .
  1. Open the attached process.
  2. Replay the toolpath for MP A in the first Stage1
  part operation.
  3. Toolpath replay is fine
  4. Generate the APT file, the apt is good.
  5. Import the APT file into a new MP.
  6. Replay the toolpath of imported apt file, relay is
  good.
  7. Repeat the same for Stage 1 RH part operation.
  8. Toolpath replay of imported apt source is no
  good. INDIRV vector in the APT source are
  correctly generated..
  .
  .
  PROBLEM
  .
  Incorrect aptsource is generated when TRACUT
  instruction is applied.
  .
  EXPECTED RESULT
  .
  APTSOURCE should be correctly generated.
  .
  

Local fix

Problem summary

• NCG / APT / CIRCLE DRIVEN INCORRECTLY WHEN TRACUT IS
  APPLIED.
  NCG / APT / CIRCLE DRIVEN INCORRECTLY WHEN
  TRACUT IS APPLIED
  .
  1. Open the attached process.
  2. Replay the toolpath for MP A in the first Stage1
  part operation.
  3. Toolpath replay is fine
  4. Generate the APT file, the apt is good.
  5. Import the APT file into a new MP.
  6. Replay the toolpath of imported apt file, relay is
  good.
  7. Repeat the same for Stage 1 RH part operation.
  8. Toolpath replay of imported apt source is no
  good. INDIRV vector in the APT source are
  correctly generated..
  .
  .
  PROBLEM
  .
  Incorrect aptsource is generated when TRACUT
  instruction is applied.
  .
  EXPECTED RESULT
  .
  APTSOURCE should be correctly generated.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION 5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE
  FIXED ON V5R17SP04, ON V5R16SP09
  .
  Incident Diagnosis :
  CIRCLE DRIVEN INCORRECTLY WHEN
  TRACUT IS APPLIED -Splitting was wrong.
  .
  Correction Explanation :
  The circle was wrongly split in case of mirror
  tracut operation.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R515 PSN

     UP

• R516 PSN

     UP

• R517 PSN

     UP