HD58149: GENERATIVE DRAFTING / TOLERANCE FORMAT IS NOT SHOWN IN OF 64BIT MODE OF CATIA

APAR status

• Closed as program error.

Error description

• GENERATIVE DRAFTING / TOLERANCE FORMAT IS
  NOT SHOWN IN OF 64BIT MODE OF CATIA
  .
  SCENARIO
  .
  1. CATIA Start on Admin mode
  2. Tools/Standard
  3. Category:Drafting , File:JIS.xml
  4. Tolerance Formats is chosen
  5. Add Instance -->TOLXXX is created
  6. TOLXXX is chosen and Change to Name
  TOL_TEST
  7. OK -->Saved
  8. File/New(Drawing)
  9. JIS.xml is chosen
  10. Line is chosen and Dimension created
  11. Dimension is chosen
  12. TOL_TEST is not displayed
  .
  Add Info:Tools / Standard / General / Allowed
  Tolerance Format : TOL_TEST
  However, the problem was not solved.
  .
  Remark: The problem is not reproduced on 32bit
  .
  PROBLEM
  .
  Tolerance format created is not listed under
  tolerance description list in 64bit Catia
  .
  EXPECTED RESULT
  .
  Tolerance format should be displayed under
  tolerance description list in 64bit Catia.
  .
  .
  

Local fix

Problem summary

• GENERATIVE DRAFTING / TOLERANCE FORMAT IS NOT SHOWN IN OF 64BIT
  MODE OF CATIA
  GENERATIVE DRAFTING / TOLERANCE FORMAT IS
  NOT SHOWN IN OF 64BIT MODE OF CATIA
  .
  SCENARIO
  .
  1. CATIA Start on Admin mode
  2. Tools/Standard
  3. Category:Drafting , File:JIS.xml
  4. Tolerance Formats is chosen
  5. Add Instance -->TOLXXX is created
  6. TOLXXX is chosen and Change to Name
  TOL_TEST
  7. OK -->Saved
  8. File/New(Drawing)
  9. JIS.xml is chosen
  10. Line is chosen and Dimension created
  11. Dimension is chosen
  12. TOL_TEST is not displayed
  .
  Add Info:Tools / Standard / General / Allowed
  Tolerance Format : TOL_TEST
  However, the problem was not solved.
  .
  Remark: The problem is not reproduced on 32bit
  .
  PROBLEM
  .
  Tolerance format created is not listed under
  tolerance description list in 64bit Catia
  .
  EXPECTED RESULT
  .
  Tolerance format should be displayed under
  tolerance description list in 64bit Catia.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP03 AND ALSO ON ON V5R16SP08.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R516 PSN SP51608

     UP06/11/27 I 1000

• R517 PSN SP51703

     UP06/12/11 I 1000