HD57822: STANDARD LINETYPE AND THICKNESS ARE NOT APPLIED ON GRAPHICS PRO PERTIES OF CENTER LINE

APAR status

• Closed as documentation error.

Error description

• STANDARD LINETYPE AND THICKNESS ARE NOT
  APPLIED ON GRAPHICS PROPERTIES OF CENTER
  LINE
  .
  Preparation:
  Standard values of Line type and Thickness of
  Center Line are changed from default graphic
  properties to 8 and 4 respectively in the ANSI.xml
  file
  Scenario:
  1. Open a New CATDrawing file with the prepared
  Standard.
  2. Create a Circle.
  3. Create a Center Line on the Circle.
  4. Show the graphic properties after right click on
  the Center Line.
  Problem!! The values of Line type and Thickness
  are not the updated standard value but the default
  value.
  Expected Result:
  The updated Standard Line type and Thickness
  should be applied on Graphic Properties of Center
  Line.
  .
  

Local fix

Problem summary

• STANDARD LINETYPE AND THICKNESS ARE NOT APPLIED ON GRAPHICS PRO
  PERTIES OF CENTER LINE
  STANDARD LINETYPE AND THICKNESS ARE NOT
  APPLIED ON GRAPHICS PROPERTIES OF CENTER
  LINE
  .
  Preparation:
  Standard values of Line type and Thickness of
  Center Line are changed from default graphic
  properties to 8 and 4 respectively in the ANSI.xml
  file
  Scenario:
  1. Open a New CATDrawing file with the prepared
  Standard.
  2. Create a Circle.
  3. Create a Center Line on the Circle.
  4. Show the graphic properties after right click on
  the Center Line.
  Problem!! The values of Line type and Thickness
  are not the updated standard value but the default
  value.
  Expected Result:
  The updated Standard Line type and Thickness
  should be applied on Graphic Properties of Center
  Line.
  .
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN CATIA
  DOCUMENTATION DELIVERED WITH CATIA
  VERSION 5 RELEASE 18.
  .
  Documentation Reference
  Interactive Drafting User Guide
  Administration Tasks
  Setting Standard Parameters
  Line Type Definition
  MODIFICATION:
  New text added to an "Important" section:
  Information : From V5 R17, it is possible to assign
  bi-dimensional line types on all mono-parametric
  geometries (line, circle, spline). However, the line
  type 8 is an exception: it is taken into account on
  geometrical lines and circles. Note that you can
  select and apply line type 8 to any other element,
  however your change will not be taken into account
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels