HD53526: DMU NAVIGATOR: PROBLEM WHEN USING V4 LAYER FILTERS

APAR status

• Closed as program error.

Error description

• Scenario:
  1) Start / Digital Mockup / DMU Navigator
  2) Insert / Existing Component
  -  Select Product1 in the tree
  -  Select the CATIA V4 model provided
  3) Tools / CATIA V4 Layer Filters
  4) Select *CRV2 on the screen (not in the tree)
  -> The Layer Filter window appears
  5) Switch to lAYCUR (layer 0)
  6) Apply then OK
  7) Select Fit All In
  8) Tools / CATIA V4 Layer Filters
  9) Switch to layer III (layer 4)
  10)Apply then OK
  -> The Layer 0 cannot be switched off
  .
  

Local fix

Problem summary

• DMU NAVIGATOR: PROBLEM WHEN USING V4 LAYER FILTERS
  Scenario:
  1) Start / Digital Mockup / DMU Navigator
  2) Insert / Existing Component
  -   Select Product1 in the tree
  -   Select the CATIA V4 model provided
  3) Tools / CATIA V4 Layer Filters
  4) Select *CRV2 on the screen (not in the tree)
  -> The Layer Filter window appears
  5) Switch to lAYCUR (layer 0)
  6) Apply then OK
  7) Select Fit All In
  8) Tools / CATIA V4 Layer Filters
  9) Switch to layer III (layer 4)
  10) Apply then OK
  -> The Layer 0 cannot be switched off
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED AT
  CATIA VERSION 5 RELEASE 18 GA LEVEL.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 HP-UX

• Fixed component ID

  569102000

Applicable component levels

• R517 PSN

     UP