HD51256: CIRCLE DISPLAY LOOKS LIKE AN ELLIPSE

APAR status

• Closed as unreproducible in next release.

Error description

• Scenario:
  1. File New Part
  2. Sel the X at the compass to have a normal view
  onto the YZ-plane
  3. Create a circle with e.g.: Circle type: Center and
  radius -> Whole Circle
  Center: Origin
  Support: yz plane
  Radius: 100mm
  4. Sel OK
  5. Sel icon
  Have a look at the displayed circle: Deviation about
  7mm in the horizontal
  .
  

Local fix

Problem summary

• CIRCLE DISPLAY LOOKS LIKE AN ELLIPSE
  Scenario:
  1. File New Part
  2. Sel the X at the compass to have a normal view
  onto the YZ-plane
  3. Create a circle with e.g.: Circle type: Center and
  radius -> Whole Circle
  Center: Origin
  Support: yz plane
  Radius: 100mm
  4. Sel OK
  5. Sel icon
  Have a look at the displayed circle: Deviation about
  7mm in the horizontal
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 14.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 18 GA level and
  on V5R17SP02
  .
  Incident Diagnosis :
  THE CIRCLE DISPLAY LOOKS LIKE AN
  ELLIPSE.
  .
  Reason :
  It is a problem with the screen definition.
  This problem is no longer reproduced now.
  You have to use "smit" tools to give the
  good size of the screen.
  Scenario:
  1- loggin as root user
  2- key in smit
  2 - Devices -> Graphic Displays -> Select the
  Display Size -> -> WIDTH = and HEIGHT =
  .
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX

• Fixed component ID

  569101000

Applicable component levels

• R517 PSN SP51702

     UP06/10/24 I 1000