IBM Support

HD51058: DMUNAV: CATDMUUTILITY TESSELLATE A WRL FILE WITHOUT GEOMETRY

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as program error.

Error description

  • ABSTRACT: DMUNAV: CATDMUUTILITY
    TESSELLATE A WRL FILE WITHOUT GEOMETRY
    .
    SCENARIO:
    1. Start a CATIA V5 Environment.
    2. Store the attached model-file in your /tmp.
    3. Use the following command CATDMUUtility -
    f /tmp/FAHRPEDALMODUL.model - wrl /tmp/test.wrl.
    .
    RESULT: The CATDMUUtility tessellate the wrl file,
    but if you load the file to CATIA V5 you will see,
    that there is no geometry in the wrl file.
    ------------------------------------------------------------
    .
    

Local fix

Problem summary

  • DMUNAV: CATDMUUTILITY TESSELLATE A WRL FILE WITHOUT GEOMETRY
    ABSTRACT: DMUNAV: CATDMUUTILITY
    TESSELLATE A WRL FILE WITHOUT GEOMETRY
    .
    SCENARIO:
    1. Start a CATIA V5 Environment.
    2. Store the attached model-file in your /tmp.
    3. Use the following command CATDMUUtility -
    f /tmp/FAHRPEDALMODUL.model - wrl /tmp/test.wrl.
    .
    RESULT: The CATDMUUtility tessellate the wrl file,
    but if you load the file to CATIA V5 you will see,
    that there is no geometry in the wrl file.
    ------------------------------------------------------------
    .
    

Problem conclusion

  • THIS PROBLEM WILL BE FIXED ON CATIA VERSION
    5 RELEASE 17 GA level.
    .
    Incident Diagnosis:
    DMUNAV: CATDMUUTILITY TESSELLATE A WRL
    FILE WITHOUT GEOMETRY
    .
    Correction Explanation:
    The problem was due to the fact that coordinates of
    some markers where bad (Infinite numbers). The
    streaming of these markers in wrl files caused
    errors in file syntax thus it was impossible to read
    them.
    .
    Answer and By-Pass:
    Now these points are replaced by (0.0 0.0 0.0)
    markers. Unfortunatly these can lead to boundary
    box bad calculation but this point is PRS.
    .
    

Temporary fix

Comments

APAR Information

  • APAR number

    HD51058

  • Reported component name

    CATIA V5 AIX

  • Reported component ID

    569101000

  • Reported release

    516

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2006-03-28

  • Closed date

    2006-05-04

  • Last modified date

    2006-05-04

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

Fix information

  • Fixed component name

    CATIA V5 AIX

  • Fixed component ID

    569101000

Applicable component levels

  • R517 PSN

       UP

[{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSVJ2K","label":"CATIA V5"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"516","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]

Document Information

Modified date:
04 May 2006