HD48342: WHEN AN USER OPENS IN CONFIGURATION A SPC PART WITH CONFIGURE F OLIOS,FOLIOS WIHTOUT ANY CONFIGURATION ARE ALWAYS OPENED

APAR status

• Closed as program error.

Error description

• When an user opens in configuration a SPC part
  with configure Folios,folios wihtout any
  configuration are always opened
  scenario:
  =========
  Environment
  - VPM 1.5 ptf27
  - DB2 7.1
  - base VPMREFDS.
  1- Connect on VPMREFDS with a CONCEPTEUR role
  and create the following
  graph:
  P-root ___ P00 -_-_-_-_mdl1-f0
                     -_-_-_-_mdl1-f1
                     -_-_-_-_mdl1-f2
        ___ P1
  (see Conf_Fol1.jpg in attached material)
  
  2- Connect on VPMREFDS with
  RESP_DICO_REGLES ￭GT_PTF
  set P-root and P00 configurable in OPTION
  Configuration > set configurable ... > Option
  (see Conf_Fol2.jpg in attached material)
  3- select P-root and define a category C1 and
  options op11 and op12.
  configuration > Dictionary management > Define
  options an
  categories
  Categories Options
  C1 op11
  op12
  (see Conf_Fol3.jpg in attached material)
  4- Open P-root in PSN and expand it all.
  5- Define the following configuration by:
  select object > Configuration > Definition
  effectivity
  P-root _(op11)_ P00 _-_(op11)_-_ mdl1-f0
                               _-_(op12)_-_ mdl1-f1
                              _-_-_-_-_-_-_ mdl1-f2
            _(op12)_ P1
           ________ P2
  There is no configuration for the folio 2(mdl1-f2)
  and the part P2.
  6- Open the gaph in configuration with option op11.
  select op11
  Expand the graph:
  ==>
  P-root _____ P00 _______ mdl1-f0 ==> OK
  (op11) (op11)
  |
  |________ mdl1-f2 ==> KO
  (see Conf_Fol3.jpg in attached material)
  The model mdl1-f2 is opened even though no
  configuration is defined
  on it.
  We can see that the behaviour is good for the
  parts: P2 is not opened.
  It is a regression compare with VPM 1.5 ptf19.
  

Local fix

Problem summary

• When an user opens in configuration a SPC part with configure F
  olios,folios wihtout any configuration are always opened
  When an user opens in configuration a SPC part
  with configure Folios,folios wihtout any
  configuration are always opened
  
  
  scenario:
  =========
  Environment
  - VPM 1.5 ptf27
  - DB2 7.1
  - base VPMREFDS.
  
  1- Connect on VPMREFDS with a CONCEPTEUR role
  and create the following
  graph:
  
  P-root ___ P00 -_-_-_-_mdl1-f0
                     -_-_-_-_mdl1-f1
                     -_-_-_-_mdl1-f2
        ___ P1
  
        ___ P2
  
  (see Conf_Fol1.jpg in attached material)
  
  2- Connect on VPMREFDS with
  RESP_DICO_REGLES  GT_PTF
  set P-root and P00 configurable in OPTION
  Configuration > set configurable ... > Option
  
  (see Conf_Fol2.jpg in attached material)
  
  3- select P-root and define a category C1 and
  options op11 and op12.
  
  configuration > Dictionary management > Define
  options an
  categories
  Categories Options
  C1 op11
  op12
  
  
  (see Conf_Fol3.jpg in attached material)
  
  4- Open P-root in PSN and expand it all.
  
  5- Define the following configuration by:
  
  select object > Configuration > Definition
  effectivity
  
  
  
  P-root _(op11)_ P00 _-_(op11)_-_ mdl1-f0
                               _-_(op12)_-_ mdl1-f1
                              _-_-_-_-_-_-_ mdl1-f2
            _(op12)_ P1
           ________ P2
  
  There is no configuration for the folio 2(mdl1-f2)
  and the part P2.
  
  6- Open the gaph in configuration with option op11.
  
  select P-root > configuration > Edit configuration ...
  select op11
  
  Expand the graph:
  
  ==>
  
  P-root _____ P00 _______ mdl1-f0 ==> OK
  (op11) (op11)
  |
  |________ mdl1-f2 ==> KO
  
  (see Conf_Fol3.jpg in attached material)
  
  The model mdl1-f2 is opened even though no
  configuration is defined
  on it.
  We can see that the behaviour is good for the
  parts: P2 is not opened.
  
  It is a regression compare with VPM 1.5 ptf19.
  
  
  
  
  
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON ENOVIA VPM
  1.5  PTF35  (HD49126).
  Folios without any configuration are always
  opened :
  .
  The behaviour is different, but for industrial
  purpose the behaviour of folio should be use :
  If a folio is available in all configuration, it will be
  displayed for any effectivity.
  If it is filtered as part, and we want it to be
  displayed, all effectivity of the available
  configuration should be set on the link in order to be
  display for any configuration choosen...
  .
  - By using the following declarative on PTF35, you
  can choose (TRUE) to get the same behaviour for
  models that parts (it means as explained
  previously that if you want to have a model
  displayed for all configurations, you will have to
  add all effectivities on it) :
  CATCDMA.VPM.EXPAND.MODEL_AS_PART :
  LOGICAL;
  CATCDMA.VPM.EXPAND.MODEL_AS_PART = TRUE;
  .
  - With no declarative or FALSE : the folio with no
  effectivty are displayed even if define configuration
  is expand (behaviour not changed)
  
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

  HD48338

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  ENOVIA VPM SOLA

• Fixed component ID

  569104900

Applicable component levels

• R150 PSY

     UP