HD46310: FTA / DIMENSIONS ARE CREATED IN BLACK AND NOT ATTACHED TO GEOME TRY

APAR status

• Closed as unreproducible in next release.

Error description

• FTA / DIMENSIONS ARE CREATED IN BLACK AND
  NOT ATTACHED TO GEOMETRY
  .
  

Local fix

Problem summary

• FTA / DIMENSIONS ARE CREATED IN BLACK AND NOT ATTACHED TO GEOME
  TRY
  FTA / DIMENSIONS ARE CREATED IN BLACK AND
  NOT ATTACHED TO GEOMETRY
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 15.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 17 GA level AND ON
  V5R16SP02.
  .
  ADDITIONAL INFORMATION
  .
  The Problem is closed UR because it si fixed for
  Dimension.18 for all 8 cases
  .
  Regarding the other KO Dimensions: These
  Dimensions were created on previous releases
  (that is they contain old TTRS with problems).
  .
  In order to get the correct result, follow the
  procedure below
  .
  1)using the environment variable
  Enable_FTA_TTRS_Rules=1 and then start CATIA
  2) Open the CATProduct and go to Product FTA WB
  3) Delete all the 17 Dimensions. Then Clean the
  the CATProduct using CATDUAV5
  4) Now create all those dimensions again. They are
  created correctly (white) with attached to atleast
  one geometry.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• 6 16 PSN

     SP51602 UP06/01/04 I 1000