HD43739: PMG / PROFILE CONTOURING APT / 2D RADIAL PROFILE

APAR status

• Closed as program error.

Error description

• PMG / PROFILE CONTOURING APT / 2D RADIAL
  PROFILE GENERATES INCORRECT CIRCLE OUTPUT
  Open the supplied CATProcess
  Note there are two profile contour ops
  They use exactly the same geometry
  But profile contour.15 is set to 2d radial
  profile in the strategy tab.
  Generate the aptsource interactively.
  The apt produced for profile contour.15 contains
  incorrect circle records.
  These have been plotted in the open body of the
  catpart. Circle.4 (in red) is the first incorrect
  circle in the aptsource.
  This relates to a record
  TLON,GOFWD/ (CIRCLE/ 12.74407, -2.70802,
  0.0000, 6.000),ON,(LINE/12.744, .......
  The circle is defined incorrectly.
  The curvature is negative to what you would
  expect. Therefore the circle centres are on the
  wrong side of the profile.the profile shouldn't
  contain elements that are curved in this way.
  .
  

Local fix

Problem summary

• PMG / PROFILE CONTOURING APT / 2D RADIAL PROFILE
  GENERATES INCORRECT CIRCLE OUTPUT
  PMG / PROFILE CONTOURING APT / 2D RADIAL
  PROFILE GENERATES INCORRECT CIRCLE OUTPUT
  Open the supplied CATProcess
  Note there are two profile contour ops
  They use exactly the same geometry
  But profile contour.15 is set to 2d radial
  profile in the strategy tab.
  Generate the aptsource interactively.
  The apt produced for profile contour.15 contains
  incorrect circle records.
  These have been plotted in the open body of the
  catpart. Circle.4 (in red) is the first incorrect
  circle in the aptsource.
  This relates to a record
  TLON,GOFWD/ (CIRCLE/ 12.74407, -2.70802,
  0.0000, 6.000),ON,(LINE/12.744, .......
  The circle is defined incorrectly.
  The curvature is negative to what you would
  expect. Therefore the circle centres are on the
  wrong side of the profile.the profile shouldn't
  contain elements that are curved in this way.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION 5 RELEASE 17 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE
  FIXED ON V5R16SP03.
  .
  Correction Explanation
  Incorrect circles are due to the connection
  between
  incorrect profile output. The profile data is
  now
  corrected.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN SP51603

     UP06/03/06 I 1000