HD43162: DMUSPA : DMU SECTIONING FILL DOESNOT WORK ON TARGET

APAR status

• Closed as program error.

Error description

• DMUSPA : DMU SECTIONING FILL DOESNOT WORK
  ON TARGET OPTION.
  SCENARIO:
  1. Open attached CATProduct.
  2. Go to DMU WorkBentch.
  3. Select Sectioning icon.
  4. Select "Geometrical target" icon in Positioning
  tab.
  Click center of Cylinder.
  5. Select " Edit position and Dimensions " icon.
  6. Click " +Ru " button 2 times.
  7. Click " +Ru " several times.
  .
  RESULT:- Area Fill does not work (see avi file).
  .
  

Local fix

Problem summary

• DMUSPA : DMU SECTIONING FILL DOESNOT WORK ON TARGET
  OPTION.
  DMUSPA : DMU SECTIONING FILL DOESNOT WORK
  ON TARGET OPTION.
  SCENARIO:
  1. Open attached CATProduct.
  2. Go to DMU WorkBentch.
  3. Select Sectioning icon.
  4. Select "Geometrical target" icon in Positioning
  tab.
  Click center of Cylinder.
  5. Select " Edit position and Dimensions " icon.
  6. Click " +Ru " button 2 times.
  7. Click " +Ru " several times.
  .
  RESULT:- Area Fill does not work (see avi file).
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION
  5 RELEASE 17 GA level.
  .
  Now you get good results and the section is
  properly filled.
  .
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN

     UP

• R517 PSN

     UP

• R518 PSN

     UP