HD38681: DIMENSIONS ON V4 MODELS ARE NOT ASSOCIATIVE (GREY) AFTER A SECT ION VIEW HAS BEEN CREATED.

APAR status

• Closed as program error.

Error description

• Dimensions on V4 models are not associative
  (grey) after a section view has been created.
  .
  Scenario :
  1 - From VPMA / Part, create part ROOT.
  2 - From CATIA V5, File + New / Part.
  3 - Create a pad.
  4 - From VPMA / Document, extract save it
  as Part1/Doc1.
  5 - From CATIA V4, create a model (cuboid)
  6 - From VPMA / model, extract save it
  as Part2/Model2.
  7 - Paste Part1 and Part2 on ROOT.
  8 - From PSN of ROOT, load Doc1 and Model2 to
  CATIA V5.
  9 - Start, mechanical, drafting (empty layout)
  10-Create a front view (select top face of the V4
  model).
  11-Create a section view
  12-Create dimensions for the V4 model
  Result : some dimensions of the V4 model are not
  associative (grey).
  .
  

Local fix

Problem summary

• Dimensions on V4 models are not associative (grey) after a sect
  ion view has been created.
  Dimensions on V4 models are not associative
  (grey) after a section view has been created.
  .
  Scenario :
  1 - From VPMA / Part, create part ROOT.
  2 - From CATIA V5, File + New / Part.
  3 - Create a pad.
  4 - From VPMA / Document, extract save it
  as Part1/Doc1.
  5 - From CATIA V4, create a model (cuboid)
  6 - From VPMA / model, extract save it
  as Part2/Model2.
  7 - Paste Part1 and Part2 on ROOT.
  8 - From PSN of ROOT, load Doc1 and Model2 to
  CATIA V5.
  9 - Start, mechanical, drafting (empty layout)
  10-Create a front view (select top face of the V4
  model).
  11-Create a section view
  12-Create dimensions for the V4 model
  Result : some dimensions of the V4 model are not
  associative (grey).
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 16 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R15SP02 AND ON V5R14SP07.
  .
  Incident Diagnosis:
  Dimension become non-associative after
  doing a section on a view drafting with V4 model
  .
  Correction Explanation:
  There was a bad management of remove with V4
  solids (it was OK before but we changed the remove
  soft)
  Now it is corrected.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX

• Fixed component ID

  569101000

Applicable component levels

• R514 PSN SP51407

     UP05/07/05 N 1000

• R515 PSN SP51502

     UP05/07/07 N 1000