HD34286: LMG / STOCK UPDATE / PROBLEM OF STATUS OF STOCK UPDATE

APAR status

• Closed as program error.

Error description

• LMG / Stock update / Problem of status of stock
  update
  .
  Scenario :
  - open CATProcess
  - double click on recess operation and replay the
  toolpath
  - click OK to close toolpath then OK to close recess
  operation
  - status for stock update for sequential operation
  is "stock up to date"
  - double click on sequential operation, status for
  stock update for sequential operation is still "stock
  up to date"
  - update the stock : the stock doesn't change
  Pb : the stock is not updated in comparison with
  the toolpath of the recess operation.
  .
  

Local fix

Problem summary

• LMG / Stock update / Problem of status of stock update
  LMG / Stock update / Problem of status of stock
  update
  .
  Scenario :
  - open CATProcess
  - double click on recess operation and replay the
  toolpath
  - click OK to close toolpath then OK to close recess
  operation
  - status for stock update for sequential operation
  is "stock up to date"
  - double click on sequential operation, status for
  stock update for sequential operation is still "stock
  up to date"
  - update the stock : the stock doesn't change
  Pb : the stock is not updated in comparison with
  the toolpath of the recess operation.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 15 GA level.
  .
  Incident Diagnosis :
  After modification of a tool change operation, the
  software does not detect that stocks must be
  recomputed. Some operations are affected by this
  tool change modification, hence stocks resulting
  from these operations should be recomputed
  correctly, which is not the case here.
  .
  Correction Explanation :
  Fixed. Now stocks are marked as "to update" (and
  then can be correctly updated) when a tool change
  is modified .
  .
  Answer and By-Pass :
  By pass : Use the "Clean Computed Stock data"
  contextual command of the PartOperation for
  forcing the correct computation of all the stocks.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R514 PSN

     UP