IBM Support

HD33881: GSD \ ISOPARAMETRIC CURVE \ CURVE CANNOT BE CREATED AT DEFINED POINT

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as fixed if next.

Error description

  • GSD \ ISOPARAMETRIC CURVE \ CURVE CANNOT
BE CREATED AT DEFINED POINT
.

Local fix

  • 



Problem summary


    

  • GSD \ ISOPARAMETRIC CURVE \ CURVE CANNOT BE CREATED AT DEFINED
POINT
GSD \ ISOPARAMETRIC CURVE \ CURVE CANNOT
BE CREATED AT DEFINED POINT
.

    



Problem conclusion


    

  • 



Temporary fix


    

  • 



Comments


    

  • THIS PROBLEM WILL BE FIXED ON CATIA VERSION
5 RELEASE 16 GA level.
.
Incident Diagnosis:
Isoparametric Curve not able to create on surface
at right-side of hole. This problem caused because
of Hole in Surface.
.
Answer and By-Pass:
Create Point on Surface at right-side of hole(say
Point.4) at the place where Isoparam Curve should
be created. Create Isoparametric Curve on surface
and replace internal point by Point.4.
.
.

    



APAR Information




    

  • APAR number
    HD33881
    • 

  • Reported component name
    CATIA V5 NT>XP
    • 

  • Reported component ID
    569151000
    • 

  • Reported release
    514
    • 

  • Status
    CLOSED  FIN
    • 

  • PE
    NoPE
    • 

  • HIPER
    NoHIPER
    • 

  • Special Attention
    NoSpecatt
    • 

  • Submitted date
    2005-01-19
    • 

  • Closed date
    2005-02-08
    • 

  • Last modified date
    2005-02-08
    • 





    

  • APAR is sysrouted FROM one or more of the following:
    

    • 

  • APAR is sysrouted TO one or more of the following:
    

    • 



Fix information


    



Applicable component levels


    

  • R514  PSN
       UP
    • 








      
              
                            

              

              [{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSVJ2K","label":"CATIA"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"514","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
              

                                                                    

          
 
        

      

    

      

        

          

            
Document Information


            

            


                        

            Modified date:
            

            08 February 2005
            

            
                      

        


        

        


      

    

  



    

  

  
    
            

          
Page Feedback