HD85901: PART : THE PART CHANGES IMMEDIATELY AFTER CLIKING THE MOVE WARN ING MESSAGE WITH THE COMPASS

APAR status

• Closed as unreproducible in next release.

Error description

• Problem:
  When modifying a point or multiset in R17 we get a
  move warning but the part is not changed. Then we
  can change the part as desired.
  When modifying a point or multiset in R19 we also
  get the move warning but the part is changed
  immediately so the user does not know how much
  he changed the coordinates.
  .
  Scenario:
  1. Open the delivered product.
  2. Snap compass to a point
  3. Move the compass
  4. The move warning appears. Answer with yes.
  ==> The part is modified, but you do not know
  how much the axis values were changed.
  .
  .
  

Local fix

Problem summary

• PART : The Part changes immediately after cliking the move warn
  ing message with the compass
  Problem:
  When modifying a point or multiset in R17 we get a
  move warning but the part is not changed. Then we
  can change the part as desired.
  When modifying a point or multiset in R19 we also
  get the move warning but the part is changed
  immediately so the user does not know how much
  he changed the coordinates.
  .
  Scenario:
  1. Open the delivered product.
  2. Snap compass to a point
  3. Move the compass
  4. The move warning appears. Answer with yes.
  ==> The part is modified, but you do not know
  how much the axis values were changed.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON CATIA
  VERSION 5 RELEASE 19.
  THIS PROBLEM IS NOT REPRODUCIBLE ON CATIA
  VERSION 5 RELEASE 19 SP05 LEVEL.
  .
  Incident Diagnosis :
  When the Part is moved with compass a warning
  message is popped up. Move will modify the
  CATPart,Continue. If Yes is pressed, the position
  is changed and when NO is pressed, the position is
  not changed.
  The Expected behavior was When yes is pressed
  the positions should not move.
  .
  Correct Application:
  Intially the position was not changed in
  R17SP3. The expected behavior is wrong that on
  Yes positions should not move. If Yes and No
  behaves the same , there was no need of two
  button. Two buttons are provided to give different
  behavior.
  This is generic behavior and needs no
  documentation and is correct on R19 and R20
  levels.
  .
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP