HD85212: CREATE HOLE WITH MACRO UP TO PLANE

APAR status

• Closed as program error.

Error description

• Abstract:
  Create Hole with Macro up to Plane
  .
  Scenario:
  1. Launch the CATIA.
  2. Record the macro for ?Hole? creation with below
  steps.
  a. Start the recording of macro by Tools > Macro >
  Start Recording
  b. Create a new Part,
  c. Create a Pad with Rectangular sketch.
  d. Create a hole with 'Up To Plane' option.
  e. Stop the recording of macro.
  .
  3. Now run the recorded macro.
  4. Double click the created hole for edition.
  5. Change the option to Blind.
  .
  Actual Result:
  The Depth option is grayed out. Depth can not be
  changed.
  .
  Expected Result:
  The Depth field should be editable.
  .
  This is regression with V5R16 SP5. On this level for
  the hole created with recorded macro, the Depth
  for blind option is editable.
  .
  

Local fix

Problem summary

• Create Hole with Macro up to Plane
  Abstract:
  Create Hole with Macro up to Plane
  .
  Scenario:
  1. Launch the CATIA.
  2. Record the macro for ?Hole? creation with below
  steps.
  a. Start the recording of macro by Tools > Macro >
  Start Recording
  b. Create a new Part,
  c. Create a Pad with Rectangular sketch.
  d. Create a hole with 'Up To Plane' option.
  e. Stop the recording of macro.
  .
  3. Now run the recorded macro.
  4. Double click the created hole for edition.
  5. Change the option to Blind.
  .
  Actual Result:
  The Depth option is grayed out. Depth can not be
  changed.
  .
  Expected Result:
  The Depth field should be editable.
  .
  This is regression with V5R16 SP5. On this level for
  the hole created with recorded macro, the Depth
  for blind option is editable.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP05
  .
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51905

     UP09/07/31 I 1000