HD85211: MTD: MOLD CREATION WITH MEUSBURGER DOES NOT WORK.

APAR status

• Closed as program error.

Error description

• MTD: MOLD CREATION WITH MEUSBURGER DOES
  NOT WORK.
  .
  SCENARIO:
  1. Start CATIA.
  2. Use Mold Tooling Design and use the
  button "Start a New Mold" (No geometry
  necessary).
  3. In that window select the catalog button "Allow
  possibilities to create standard mold by using
  supplier catalogs".
  4. Select "Meusburger" > "F-Vertical" > "Normal"
  > "withOverW".
  5. Select the size MoldL=646mm MoldW=496mm
  (line 191).
  6. Click OK.
  Result: The reference is 126*156 and not 496*646.
  This is the problem.
  It is also impossible to select the "bigger" sizes of
  the frame, for that select the Reference button.
  .
  .
  

Local fix

Problem summary

• MTD: MOLD CREATION WITH MEUSBURGER DOES NOT WORK.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  Incident Diagnosis:
  MTD: MOLD CREATION WITH MEUSBURGER DOES
  NOT WORK.
  .
  Correction Explanation:
  References used for the catalog browser and for the
  design table were not the same. The same
  references are used now and result is as expected.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R519 PSN

     UP