HD85064: DRAFTING - RELINK OF CATDRAWING RESULTS IN CLICK OK TO TERMINAT E ABEND

APAR status

• Closed as duplicate of another APAR.

Error description

• Scenario :
  1- Start CATIA with the Environment Variable
  2- File / New / Product : create new Product1
  3- File / Open Open Filebased.CATProduct and
  Filebased.CATDrawing
  4- Select the components in Filebased.CATProduct
  and select Copy with MB3
  5- Go to the new Product Product1 and do the
  Paste operation
  Result :
  You can see that Assembly.2 is not visible in the
  specific tree; there is a problem in the tree.
  6- Close Filebased.CATProduct
  7- Window and switch to Filebased.CATDrawing
  8- Edit / Links, Pointed Document tab, Replace
  9- Select Cancel in File Selection window.
  10- From Browse window Select Loaded Document
  11- From Session document window, select
  Product1.CATProduct
  12- Select OK
  Result :
  Click OK to terminate - CATIA Abends
  Expected Result:
  Error message should be returned that Replace is
  not allowed.
  .
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• THE PROBLEM HAS BEEN FOUND TO BE ANOTHER
  SYMPTOM OF THE PROBLEM REPORTED IN
  HD81917.
  PROBLEM CONCLUSION:
  THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP05
  .
  INCIDENT DIAGNOSIS
  Click OK to Terminate when attempting to replace
  Drawing links
  .
  CORRECTION EXPLANATION
  There is no more abend and proper error message
  is displayed when performing Edit / Links / Replace
  .
  Problem fixed on the V5R19 SP04 level.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels