HD84655: DISABLING SCRIPT FOR SAVE OPERATION

APAR status

• Closed as user error.

Error description

• Disabling script for save operation
  please find the new Service Request for the
  problem concerning 'Disable scripts'.
  ..........
  In relation with the following SR (SR00016268 and
  SR00013606-solved) actually handled by
  SmarTeam Israel, we found that setting the
  following value BasicScript.Enabled=FALSE in the
  context to disable the scripts in a Save Operation,
  does not work according to the normal expected
  behavior.
  Scenario;
  Using MIKRON environment placed onto GTSC
  workspace (see below)
  0. Set BasicScript.Enabled=FALSE
  (LoadPropertiesOnOpen = TRUE as in SR00016261,
  though it is not related to the problem of this defect)
  1. In Inventor launched with SmarTeam integration
  click File / Open => ST Open Dialog appears =>
  click System Folders => Inventor Open appears
  => choose file type *iam => find (Checked Out)
  RIT-251108074217.iam and click OPEN.
  2. The Assembly is opened with messages and
  prompts described below.
  THEY ARE NOT RELATED TO THE DEFECT AND
  PROVIDED ONLY FOR APPLYING THE SCENARIO.
  [BE AWARE, now there will be FOUR next Inventor
  messages on which you should answer positively.
  If you are clicking fast, you can not stop and
  restart the timer for the time for such FOUR clicks
  is very small and not essential relating to all
  operation time.
  All the FOUR Inventor messages will be appeared
  in first 30-50 s from click on Open.
  Note: there is Inventor Resolve Link window
  appears with Unresolved References related to all
  Non Revision Managed Standard Part (for on our
  environment we have no theirs xml's) => Click
  Skip All and continue to take time till the end of
  Open operation.
  Note: there is Inventor 11 warning regarding aju-
  020708115928.iam and N948.70.00.016.IPT, which
  not same as originally referenced => Click Yes.
  Note: there is Inventor 11 warning regarding
  Inventor allows to use unresolved components =>
  Click OK.
  Note: there is Inventor 11 prompt regarding
  changes been made to some assembly
  components. Would you like to update the
  assembly now? => Click Yes].
  3. Check that the Checked Out RIT-
  251108074217.iam shown as SmarTeam object by
  SMARTEAM File Explorer and by Locate Active
  Document - OK.
  4. Click SmarTeam Save in Inventor integration
  menu.
  KO: Project Manager appears and the Checked Out
  Assembly TREATED AS NON SMARTEAM OBJECT
  THERE SHOULD NOT BE Project Manager appeared
  for the Object already Saved to SmarTeam
  .
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• USER ERROR FOUND WHILE USING
  SOME SCRIPT HOOKED TO CALL SCRIPT FUNCTION
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels