HD84123: PS: 0SM_S244 ERROR IS SHOWN WHEN SAVING A PRODUCT AFTER A CUT A ND PASTE OPERATION.

APAR status

• Closed as program error.

Error description

• SCENARIO:
  1) Start CATIA.
  2) File \ Open \ Select provided
  Product50.CATProduct.
  3) Select the G06687001.1 Instance and Drag \
  Drop it on f.1 Component, in order to move it.
  4) Go to File \ Save Management.
  5) Product50.CATProduct has 'Modified' Status.
  6) Click on Save. Then click on OK.
  7) A Save All Report is displayed:
  1 errors occurred during Save All
  0SM_S244 : Cannot execute Save operation
  because C:\...\Product50.CATProduct is pointing to
  clipboard.
  .
  OBSERVATION:
  A Product cannot be saved after performing a drag
  \ drop operation on one of its child elements.
  .
  

Local fix

Problem summary

• SCENARIO:
  1) Start CATIA.
  2) File \ Open \ Select provided
  Product50.CATProduct.
  3) Select the G06687001.1 Instance and Drag \
  Drop it on f.1 Component, in order to move it.
  4) Go to File \ Save Management.
  5) Product50.CATProduct has 'Modified' Status.
  6) Click on Save. Then click on OK.
  7) A Save All Report is displayed:
  1 errors occurred during Save All
  0SM_S244 : Cannot execute Save operation
  because C:\...\Product50.CATProduct is pointing to
  clipboard.
  .
  OBSERVATION:
  A Product cannot be saved after performing a drag
  \ drop operation on one of its child elements.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R21 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP4.
  Additional Closure Information:
  INCIDENT DIAGNOSIS:
  0SM_S244 error is shown when saving a product after a cut and
  paste operation. This is due to the fact that the Product
  contains a corruption due to a ghost link.
  CORRECTION EXPLANATION:
  A new rule (BRK_1) is now added to remove the above mentioned
  ghost link. After cleaning with CATDUA, BRK_1 error would be
  detected for such Product / Part. After cleaning the data
  with CATDUA the issue would be solved.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP