HD83984: CLEANER: CATIA CRASHES WITH CLICK OK TO TERMINATE WHILE RUNNING CATDUA ON CATDRAWING.

APAR status

• Closed as program error.

Error description

• SCENARIO:
  1) Start CATIA R19SP3.
  2) Open any of the provided CATDrawing file.
  3) Go to File / Desk.
  4) Right Click on the drawing and select CATDUAV5.
  5) Select Clean or Check.
  6) Click Run.
  .
  OBSERVATION:
  CATIA crashes with following message: Click Ok to
  Terminate
  .
  

Local fix

Problem summary

• CLEANER: CATIA crashes with click ok to terminate while running
  CATDUA on CATDrawing.
  SCENARIO:
  1) Start CATIA R19SP3.
  2) Open any of the provided CATDrawing file.
  3) Go to File / Desk.
  4) Right Click on the drawing and select CATDUAV5.
  5) Select Clean or Check.
  6) Click Run.
  .
  OBSERVATION:
  CATIA crashes with following message: Click Ok to
  Terminate
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP05.
  .
  INCIDENT DIAGNOSIS:
  CATIA crashes with click ok to terminate while
  running CATDUA on CATDrawing.
  .
  CORRECTION EXPLANATION:
  The algortihm managing an aggregation issue
  between a Drawing and its Sheet crashes when
  there are some very specific aggregation issues
  involving a Drawing. The algorithm is modified so
  that problem is not produced anymore.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R519 PSN SP51905

     UP09/07/31 I 1000