HD83796: ANALYSIS (FEM) / INTERNAL ERROR OCCUR AFTER "MESH THE PART" FOR OFFSET SURFACE

APAR status

• Closed as program error.

Error description

• ANALYSIS (FEM) / Internal Error occur after "Mesh
  The Part" for Offset surface
  .
  SCENARIO:
  .
  1. Open attached CATProduct file.
  2. Change workbench to the "Advanced Meshing
  tools".
  3. Refer to attached PPT file for various meshing
  parameters.
  4. Define the mesh parameters and select OK.
  5. Click the "Mesh The Part" button.
  RESULT:
  Following error message is shown:
  \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
  GetLow on an empty CATCrvLimits has no mean.
  \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
  .
  6. Click the "Yes" button.
  .
  .
  EXPECTED RESULT:
  .
  Error message should not be shown and mesh
  should be generated.
  If there is some problem in model the error
  message should be a tangible message.
  .
  .
  .
  

Local fix

Problem summary

• ANALYSIS (FEM) / Internal Error occur after "Mesh The Part" for
  Offset surface
  ANALYSIS (FEM) / Internal Error occur after "Mesh
  The Part" for Offset surface
  .
  SCENARIO:
  .
  1. Open attached CATProduct file.
  2. Change workbench to the "Advanced Meshing
  tools".
  3. Refer to attached PPT file for various meshing
  parameters.
  4. Define the mesh parameters and select OK.
  5. Click the "Mesh The Part" button.
  RESULT:
  Following error message is shown:
  \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
  GetLow on an empty CATCrvLimits has no mean.
  \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
  .
  6. Click the "Yes" button.
  .
  .
  EXPECTED RESULT:
  .
  Error message should not be shown and mesh
  should be generated.
  If there is some problem in model the error
  message should be a tangible message.
  .
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  .
  INCIDENT DIAGNOSIS:
  .
  A part was not meshed and error message was
  shown.
  .
  .
  CORRECTION EXPLANATION:
  .
  The code is now fixed.
  Part is meshed without any message..
  .
  .
  NOTE:
  .
  Problem is also fixed on V5R19SP05 level.
  .
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51905

     UP09/07/31 I 1000