HD82959: NO OBJECT NAME IN THE INCIDENT REPORT WINDOW (CATIA V5)

APAR status

• Closed as program error.

Error description

• No object name in the Incident Report window
  .
  Scenario:
  1- Start VPM
  2- Select Object - Model
  3- Select Create & Save
  4- Create a new V4 model (by using CATIA as
  source if you have open Catia V4 and design a
  model)
  5- Create an assembly including the newly created
  V4 model
  6- Rename or delete the longfield of this document
  7- From VPM open the previously saved model in
  CV5
  Result: An error report should tell you that you
  have no right to open this model, but the object
  field is empty.
  .
  

Local fix

Problem summary

• No object name in the Incident Report window (CATIA V5)
  No object name in the Incident Report window
  .
  Scenario:
  1- Start VPM
  2- Select Object - Model
  3- Select Create & Save
  4- Create a new V4 model (by using CATIA as
  source if you have open Catia V4 and design a
  model)
  5- Create an assembly including the newly created
  V4 model
  6- Rename or delete the longfield of this document
  7- From VPM open the previously saved model in
  CV5
  Result: An error report should tell you that you
  have no right to open this model, but the object
  field is empty.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 19 SP04 LEVEL.
  .
  Incident Diagnosis
  No object name in the Incident Report window for
  models.
  .
  Correction Explanation
  In CATVPMDocDesc::GetDocType() there was no
  call for QueryOnTable in case of model.
  QueryOnTable called in GetDocType to resolve the
  issue.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX

• Fixed component ID

  569101000

Applicable component levels

• R519 PSN SP51904

     UP09/05/06 I 1000