HD82555: PD: REORDER/ CATIA ABEND WHEN HOLE REORDERED

APAR status

• Closed as unreproducible in next release.

Error description

• SCENARIO:
  1. Open Part.CATPart
  2. Select Hole feature.
  3. Reorder hole after pad.
  4. CATIA abend with click OK to terminate
  message. This is problem.
  .
  EXPECTED RESULT:
  CATIA should not abend.
  .
  

Local fix

Problem summary

• PD: Reorder/ CATIA abend when hole reordered
  SCENARIO:
  1. Open Part.CATPart
  2. Select Hole feature.
  3. Reorder hole after pad.
  4. CATIA abend with click OK to terminate
  message. This is problem.
  .
  EXPECTED RESULT:
  CATIA should not abend.
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON CATIA
  VERSION 5 RELEASE 18.
  THIS PROBLEM IS NOT REPRODUCIBLE ON CATIA
  VERSION 5 RELEASE 20 GA LEVEL.
  NOTE: THIS PROBLEM IS NOT REPRODUCIBLE ON
  CATIA V5R19SP04 LEVEL.
  .
  Incident Diagnosis:
  CATIA abend when hole feature is reordered.
  .
  Reason:
  Problem is not reproducible on R19 SP04 , R20 GA
  level. Feature is correctly reordered without any
  abend.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51904

     UP09/05/06 I 1000