HD82474: STCAI / MAPPINGS ARE NOT WORKING AFTER THE MIGRATION FROM R16 T O R19

APAR status

• Closed as program error.

Error description

• STCAI / MAPPINGS ARE NOT WORKING AFTER THE
  MIGRATION FROM R16 TO R19.
  .
  1. Use the Attached DB by attaching it using
  Database connection manager
  2. Set the Expose Mode of drawing to No in
  Smarteam
  3. Start CATIA and Open the drawing
  4. Save the Darwing to Smarteam.
  .
  Problem: Mapped attributes Drw-Number and
  machine Fileds are empty.
  .
  Expected result: They should work like
  CATIAV5R18SP05
  .
  Additonal information:
  .
  scenario from scratch:
  - Verify the Configuration Setting Expose Mode is
  set to NO
  - via DMD, create the following fields for the class
  CATDrawing
  - Drawing_Number Char 20
  - Drawing_Machine Char 20
  - via FormDesigner, add two Textfields to the
  ProfileCard of the
  CATDrawing and link them to
  the "Drawing_Number" and "Drawing_Machine".
  - via Integration Tools Setup, I added the mapping
  for:
  - Macchina - Drawing_Machine
  - Numero_Disegno - Drawing_Number
  - Open the attached CATDrawing (in Zip-File
  SR00XXXXX.zip)
  - Save the CATDrawing via SmarTeam / Save to
  SmarTeam the two mapped fields are not filled
  .
  .
  

Local fix

Problem summary

• STCAI / MAPPINGS ARE NOT WORKING AFTER THE MIGRATION FROM R16
  TO R19.
  .
  1. Use the DB
  2. Set the Expose Mode of drawing to
  No in Smarteam
  3. Start CATIA and Open the drawing
  4. Save the
  Darwing to Smarteam.
  .
  Problem: Mapped attributes Drw-Number
  and machine Fileds are empty.
  .
  Expected result: They should
  work like CATIAV5R18SP05
  .
  Additonal information:
  .
  scenario
  from scratch:
  - Verify the Configuration Setting Expose Mode
  is set to NO
  - via DMD, create the following fields for the
  class CATDrawing
  - Drawing_Number Char 20
  - Drawing_Machine
  Char 20
  - via FormDesigner, add two Textfields to the
  ProfileCard of the
  CATDrawing and link them to the
  "Drawing_Number" and
  "Drawing_Machine".
  - via Integration
  Tools Setup, I added the mapping
  for:
  - Macchina -
  Drawing_Machine
  - Numero_Disegno - Drawing_Number
  - Open the
  attached CATDrawing (in Zip-File)
  - Save the CATDrawing via
  SmarTeam / Save to SmarTeam the two mapped
  fields are not
  filled
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5 RELEASE 20 GA
  LEVEL.
  NOTE THAT THIS PROBLEM WILL BE ALSO FIXED ON
  V5R19SP04
  Additional Closure Information:
  .
  Additional Closure
  Information:
  .
  Incident Diagnosis
  MAPPINGS ARE NOT WORKING
  AFTER THE MIGRATION FROM R16 TO R19
  .
  Correction Explanation
  There was issue in TexdId mapping. Now the problem is fixed.
  Mapped
  value are correctly searched and filled.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP