HD82442: MACHINING (PMG) /

APAR status

• Closed as program error.

Error description

• Machining (PMG) /
  Can not set specific behavior in Admin Mode
  Scenario:-
  1. Start CATIA in Admin Mode.
  2. Take a PMG license.
  3. Open a CATProcess.
  4. Click on the Drilling icon .
  5. Note that in the Drilling dialog the
  "Output CYCLE syntax" check box is checked.
  6. Uncheck the "Output CYCLE syntax" check box.
  Click OK and exit
  7. Delete the Operation created.
  8. Pick Manufacturing Program and Click on the
  Drilling icon.
  RESULT:- Note that when you open the Drilling
  Dialog in the
  PMG workbench the "Output CYCLE syntax" check
  box is checked again
  EXPECTED RESULT:-When the Drilling Dialog box is
  opened again the option should appear unchecked
  .
  

Local fix

Problem summary

• Machining (PMG) /
  Can not set specific behavior in Admin Mode
  Machining (PMG) /
  Can not set specific behavior in Admin Mode
  Scenario:-
  1. Start CATIA in Admin Mode.
  2. Take a PMG license.
  3. Open a CATProcess.
  4. Click on the Drilling icon .
  5. Note that in the Drilling dialog the
  "Output CYCLE syntax" check box is checked.
  6. Uncheck the "Output CYCLE syntax" check box.
  Click OK and exit
  7. Delete the Operation created.
  8. Pick Manufacturing Program and Click on the
  Drilling icon.
  RESULT:- Note that when you open the Drilling
  Dialog in the
  PMG workbench the "Output CYCLE syntax" check
  box is checked again
  EXPECTED RESULT:-When the Drilling Dialog box is
  opened again the option should appear unchecked
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA V5R20GA
  LEVEL.
  INCIDENT DIAGNOSIS:-
  When the user creates a machining operation, sets
  its parameters and validates by OK,
  the strategy and geometry parameters are saved in
  the process.
  When the user creates a new operation, these
  saved
  parameters are used to set by default the
  parameter of this new operation.
  CORRECTION EXPLANATION:-
  This management for the syntax parameters (in the
  drilling operation, as "Ouput cycle" for example)
  was not done.
  BYPASS:-
  None
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP