HD82044: CATDrawing with two or more views and frame is not displayed by SmarTeam Viewer

APAR status

• Closed as unreproducible in next release.

Error description

• CATDrawing with two or more views and frame is
  not displayed            by SmarTeam Viewer
  Env : CATIA V5R17 SP06 / SMARTEAM V5R18 SP06
  Windows XP SP02, 2003 Server
  D/B : SNE PLM Database / Oracle 10.2.0.3
  Prob: CATDrawing with two or more views and
  frame
  is not displayed by ST-Viewer
  Work Bench: CATIA Integration
  .
  Preparation:(Please see attached ppt file)
  1. Launch CV5
  1-1. Tools/Options/General/Compatibility/Graphic
  Formats Tab
  1-2. Active "Save multisheet document in a
  single ..."
  1-3. Active "Put current sheet as the first page of
  the ..."
  2. Launch SMARTEAM Editor
  2-1. Tools/Application Setup/CATIA Drawings/Tools
  2-2. Embedded Viewer Setting
  Check "Built-In Viewer"
  Viewer type : SmarTeam Viewer
  Viewer file extension : CATDrawing.cgm
  Redline file extension: .red
  Check "Hide Toolbars"
  .
  Scenario:
  1. Launch SMARTEAM Editor
  2. Select "AG_TEST_ERTY-
  IHI_Standard.CATDrawing",
  Click "Viewer" Tab
  .
  KO !! CATDrawing with two or more views and
  frame
  is not displayed by SMARTEAM Viewer
  .
  Additional Information:
  1. This problem is reproduced on CV5 R17SP04,
  SP06
  2. This problem is not reproduced on CV5
  R17SP07, R18SP06
  .
  Material: 76034826.695A
  - 76034826_695.ppt : Scenario ppt file
  - AG_TEST_ERTY-IHI_Standard.CATDrawing:
  CATIA Drawing file
  

Local fix

Problem summary

• CATDrawing with two or more views and frame is
  not displayed            by SmarTeam Viewer
  Env : CATIA V5R17 SP06 / SMARTEAM V5R18 SP06
  Windows XP SP02, 2003 Server
  D/B : SNE PLM Database / Oracle 10.2.0.3
  Prob: CATDrawing with two or more views and
  frame
  is not displayed by ST-Viewer
  Work Bench: CATIA Integration
  .
  Preparation:(Please see attached ppt file)
  1. Launch CV5
  1-1. Tools/Options/General/Compatibility/Graphic
  Formats Tab
  1-2. Active "Save multisheet document in a
  single ..."
  1-3. Active "Put current sheet as the first page of
  the ..."
  2. Launch SMARTEAM Editor
  2-1. Tools/Application Setup/CATIA Drawings/Tools
  2-2. Embedded Viewer Setting
  Check "Built-In Viewer"
  Viewer type : SmarTeam Viewer
  Viewer file extension : CATDrawing.cgm
  Redline file extension: .red
  Check "Hide Toolbars"
  .
  Scenario:
  1. Launch SMARTEAM Editor
  2. Select "AG_TEST_ERTY-
  IHI_Standard.CATDrawing",
  Click "Viewer" Tab
  .
  KO !! CATDrawing with two or more views and
  frame
  is not displayed by SMARTEAM Viewer
  .
  Additional Information:
  1. This problem is reproduced on CV5 R17SP04,
  SP06
  2. This problem is not reproduced on CV5
  R17SP07, R18SP06
  .
  Material: 76034826.695A
  - 76034826_695.ppt : Scenario ppt file
  - AG_TEST_ERTY-IHI_Standard.CATDrawing:
  CATIA Drawing file
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
      I-PLM Collaborative Innovation VERSION V5R17.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  I-PLM Collaborative Innovation VERSION V5R20 GA level
  Additional Closure Information:
  Closed by Cimmetry fixed in AV20
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP