HD81458: THE DISPLAY OF A SURFACE IS DEFORMED

APAR status

• Closed as unreproducible in next release.

Error description

• SCENARIO:
  1 Start CATIA
  2 Fix, 3D Accuracy 0.01
  3 Open the sent file "P00682.CATPart".
  Workbench: Generative Shape Design
  4-1) Double-click "Join.1".
  "Join Definition" window is opened.
  4-2) check the order of selected surfaces as below.
  Order: Surface.3 >> Surface.2 >> Surface.1
  4-3) Clicks OK.
  5) Zoom up a surface painted blue and move it to
  be lighted bright.
  .
  OBSERVATION1:
  Now, you see no deformations or wrinkles on the
  surface.
  .
  6-1Double-click the "Join.1".
  "Join Definition" window is opened.
  6-2) Click MB3 in the "Elements To Join" window.
  Contextual menu is opened.
  6-3) Select "Clear Selection".
  There is no selection in the "Elements To Join"
  window.
  6-4) Select "Surface.1", then "Surface.2",
  then "Surface.3" from the tree.
  Order: Surface.1 >> Surface.2 >> Surface.3
  7) Zoom up a surface painted blue and move it to
  be lighted bright.
  .
  OBSERVATION:
  Now, you see the deformation like wrinkles on the
  surface.
  .
  .
  

Local fix

Problem summary

• The display of a surface is deformed
  SCENARIO:
  1 Start CATIA
  2 Fix, 3D Accuracy 0.01
  3 Open the sent file "P00682.CATPart".
  Workbench: Generative Shape Design
  4-1) Double-click "Join.1".
  "Join Definition" window is opened.
  4-2) check the order of selected surfaces as below.
  Order: Surface.3 >> Surface.2 >> Surface.1
  4-3) Clicks OK.
  5) Zoom up a surface painted blue and move it to
  be lighted bright.
  .
  OBSERVATION1:
  Now, you see no deformations or wrinkles on the
  surface.
  .
  6-1Double-click the "Join.1".
  "Join Definition" window is opened.
  6-2) Click MB3 in the "Elements To Join" window.
  Contextual menu is opened.
  6-3) Select "Clear Selection".
  There is no selection in the "Elements To Join"
  window.
  6-4) Select "Surface.1", then "Surface.2",
  then "Surface.3" from the tree.
  Order: Surface.1 >> Surface.2 >> Surface.3
  7) Zoom up a surface painted blue and move it to
  be lighted bright.
  .
  OBSERVATION:
  Now, you see the deformation like wrinkles on the
  surface.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON CATIA
  VERSION 5 RELEASE 18.
  THIS PROBLEM IS NOT REPRODUCIBLE ON CATIA
  V5R20 GA LEVEL.
  AND ON V5R19SP03
  INCIDENT DIAGNOSIS:
  The display of a surface is deformed.
  .
  CORRECTION EXPLAINATION:
  The surface is now displayed correctly on latest
  CATIA levels and no deformation or wrinkles are
  seen.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP