HD81398: A PART OF HIDDEN GEOMETRY IN DRAFTING IS SHOWN AFTER SWAP LOCATION TWICE IN SKETCHER

APAR status

• Closed as Permanent restriction.

Error description

• A part of hidden geometry in Drafting is shown
  after Swap location twice in Sketcher
  SCENARIO:
  1. Start CATIA V5 and open
  HIDDEN_R19_TEST.CATPart.
  2. From menu bar, select [File/New] and open a
  new Drawing with any Standard and any Style.
  (Standard: JIS, Sheet Style: A4 JIS, Portrait for
  example)
  3. Create a Front View by clicking Front View icon
  and select YZ plane in 3D.
  4. Create an Offset Section View by a horizontal
  line through the origin point.
  5. Hide three lines in the offset section view.
  6. Activate Pocket.9 from the tree in 3D.
  7. Update current sheet, then hide the Pocket (four
  lines).
  8. From 3D, double click on Sketch.15 of the
  Pocket.9 and double click on 50mm Constraint in
  the Sketcher.
  9. After Constraint Definition dialog is displayed,
  click on More button, click on Swap location, click
  on OK and exit Sketcher.
  10. It is confirmed that the Pocket location is
  changed.
  11. In Drafting, Update current sheet.
  12. Change to 3D again, double click on Sketch.15
  of the Pocket.9 and double click on 50mm
  Constraint in the Sketcher.
  13. After Constraint Definition dialog is displayed,
  click on More button, click on Swap location, click
  on OK and exit Sketcher.
  14. It is confirmed that the Pocket location is
  changed.
  15. In Drafting, Update current sheet.
  RESULT
  A part of Pocket is displayed.
  EXPECTED RESULT:
  A part of hidden geometry in Drafting should not be
  shown even after Swap location twice in Sketcher.
  .
  

Local fix

Problem summary

• A part of hidden geometry in Drafting is shown after Swap
  location twice in Sketcher
  A part of hidden geometry in Drafting is shown
  after Swap location twice in Sketcher
  SCENARIO:
  1. Start CATIA V5 and open
  HIDDEN_R19_TEST.CATPart.
  2. From menu bar, select  File/New  and open a
  new Drawing with any Standard and any Style.
  (Standard: JIS, Sheet Style: A4 JIS, Portrait for
  example)
  3. Create a Front View by clicking Front View icon
  and select YZ plane in 3D.
  4. Create an Offset Section View by a horizontal
  line through the origin point.
  5. Hide three lines in the offset section view.
  6. Activate Pocket.9 from the tree in 3D.
  7. Update current sheet, then hide the Pocket (four
  lines).
  8. From 3D, double click on Sketch.15 of the
  Pocket.9 and double click on 50mm Constraint in
  the Sketcher.
  9. After Constraint Definition dialog is displayed,
  click on More button, click on Swap location, click
  on OK and exit Sketcher.
  10. It is confirmed that the Pocket location is
  changed.
  11. In Drafting, Update current sheet.
  12. Change to 3D again, double click on Sketch.15
  of the Pocket.9 and double click on 50mm
  Constraint in the Sketcher.
  13. After Constraint Definition dialog is displayed,
  click on More button, click on Swap location, click
  on OK and exit Sketcher.
  14. It is confirmed that the Pocket location is
  changed.
  15. In Drafting, Update current sheet.
  RESULT
  A part of Pocket is displayed.
  EXPECTED RESULT:
  A part of hidden geometry in Drafting should not be
  shown even after Swap location twice in Sketcher.
  .
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN
  CATIA
  .
  INCIDENT DIAGNOSIS
  A part of hidden geometry in Drafting is shown
  after Swap location twice in Sketcher
  .
  RESTRICTION EXPLANATION
  CGM (CATIA Geometric Model) Id's on the 3d
  design are lost. These Id's are used to keep the
  graphical changes made in the drawing.
  On the left side, the Id's are kept cause the
  circular face is unique, where as on the right the
  front and bottom faces are separate (different)
  faces.
  .
  By-Pass
  Use section cut instead of a section view
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels