HD80245: FSS: PORCUPINE CURVATURE ANALYSIS: AMPLITUDE VALUE IS CHANGED D UE TO UNDO OPERATION

APAR status

• Closed as program error.

Error description

• FSS: Porcupine Curvature Analysis: Amplitude
  value is changed due to Undo operation
  .
  SCENARIO:
  0) Start CATIA.
  1) Open the CATPart
  W/B FSS.
  2) Expand 0000000 node in tree.
  =Tree is expanded.
  3) Click Porcupine Curvature Analysis icon.
  =Porcupine Curvature window is displayed.
  4) Set the parameter in the Porcupine Curvature
  window as following-
  - Type: Radius
  - Density: 1000
  - Amplitude: 0.1
  - Activate Particular and Envelop button.
  5) Select 3D Curve.10 in tree.
  6) Click OK in the Porcupine Curvature window.
  7) Double click 3D Curve.10 in tree.
  =3D Curve window is displayed.
  =Control points of 3D Curve.10 are displayed in
  geometrical area.
  8) Select any control points and move them by
  drag and drop.
  9) Click OK in the 3D Curve window.
  10) Click Undo icon.
  11) Double click the created Porcupine analysis
  .
  PROBLEM:
  The value of Amplitude is changed automatically.
  .
  

Local fix

Problem summary

• FSS: Porcupine Curvature Analysis: Amplitude value is changed d
  ue to Undo operation
  FSS: Porcupine Curvature Analysis: Amplitude
  value is changed due to Undo operation
  .
  SCENARIO:
  0) Start CATIA.
  1) Open the CATPart
  W/B FSS.
  2) Expand 0000000 node in tree.
  =Tree is expanded.
  3) Click Porcupine Curvature Analysis icon.
  =Porcupine Curvature window is displayed.
  4) Set the parameter in the Porcupine Curvature
  window as following-
  - Type: Radius
  - Density: 1000
  - Amplitude: 0.1
  - Activate Particular and Envelop button.
  5) Select 3D Curve.10 in tree.
  6) Click OK in the Porcupine Curvature window.
  7) Double click 3D Curve.10 in tree.
  =3D Curve window is displayed.
  =Control points of 3D Curve.10 are displayed in
  geometrical area.
  8) Select any control points and move them by
  drag and drop.
  9) Click OK in the 3D Curve window.
  10) Click Undo icon.
  11) Double click the created Porcupine analysis
  .
  PROBLEM:
  The value of Amplitude is changed automatically.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP04 AND ON V5R18SP08
  Incident Diagnosis:
  A particular flag is not set on parameters and
  another algorithm is called to update the amplitude
  factor. Due to this the value of Amplitude is
  changed.
  .
  Correction Explanation:
  The correction has consisted in firstly calling the
  method which sets the particular flag on the
  parameters, then stream those parameters.
  Now the value of Amplitude does not be changed
  by undo operation.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN

     UP