HD79826: PAD IS NOT UPDATED CORRECTLY AFTER PROFILE'S MODIFICATION .

APAR status

• Closed as fixed if next.

Error description

• PART DESIGN: Pad is not updated correctly after
  the profile is modified
  1. Open the CATPart attached to the PMR
  2. Click "Pad" icon.
  >> "Pad Definition" dialog box is displayed.
  3. Activate "Thick" option.
  4. Click "OK" button.
  >> Pad is created.
  -- Case A --
  5-A. Double-click the Sketch.1.
  >>> Workbench is changed to Sketch.
  6-A. Create a line from arbitrary point to the circle.
  7-A. Click "Exit workbench" icon.
  >>> The pad is not updated correctly.
  >>> This is the problem.
  -- Case B --
  5-B. Double-click the Sketch.2.
  >>> Workbench is changed to Sketch.
  6-B. Create a line from the left circle to the right
  circle.
  7-B. Click "Exit workbench" icon.
  >>> The pad is not updated correctly.
  >>> This is the problem.
  -- Case C --
  5-C. Double-click the Sketch.3.
  >>> Workbench is changed to Sketch.
  6-C. Create lines between the each circles..
  7-C. Click "Exit workbench" icon.
  >>> The pad is not updated correctly.
  >>> This is the problem.
  -- Case D --
  5-D. Double-click the Sketch.4.
  >>> Workbench is changed to Sketch.
  6-D. Create lines between the each circles..
  7-D. Click "Exit workbench" icon.
  >>> The pad is not updated correctly.
  >>> This is the problem.
  < Expected Result >
  the pad should be updated correctly when the
  profile is
  modified.
  Scenario replayed on R18Sp08 and R19SP03
  .
  

Local fix

Problem summary

• PART DESIGN: Pad is not updated correctly after profile's
  modification
  Specific Sketch Profile generates wrong Pad
  geometry definition when the thick option is used.
  Sketch
  profile example: Two circles joined with a line in
  between.
  Scenario replayed on CATIA V5R18SP08 and CATIA V5R19SP03between.
  Scenario replayed on CATIA V5R18SP08 and CATIA
  V5R19SP03
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WILL FIX IN CATIA VERSION
  5 RELEASE 20 GA LEVEL
  AND ON CATIA
  V5R19SP04
  Incident Diagnosis:
  error occur with
  the Pad thick option
  .
  Correction Explanation :
  The
  relimitation of the originated contours
  has two
  intersections: so it can lead to this
  error
  .
  Answer and
  By-Pass:
  No possible by-pass but the problem is
  fixed since
  R19 SP4 level now
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels

• R518 PSN

     UP