HD79748: MTD: THE TRANSFORMATION FEATURES ARE NOT SELECTABLE FROM THE TR EE WHEN ADDING MOLD TOOLING PARTS.

APAR status

• Closed as suggestion for future release.

Error description

• SCENARIO:
  1. Start CATIA
  2. Open CATProduct
  Work-Bench: Mold tooling design
  3. Select "Add leader pin" icon.
  Define Leader Pin dialog-box is opened.
  4. Select "Translate.1" on the tree.
  .
  OBSERVATION 1:
  "Translate.1" can't be selected from the tree.
  .
  5. Select Translate .1 form environment
  .
  OBSERVATION 2:
  The point is selected.
  .
  OBSERVATION 3:
  Only the points created using transformation are
  not selectable form the tree.
  .
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• THIS APAR IS CONSIDERED AS A SUGGESTION
  FOR IMPROVEMENT FOR CATIA.
  PLEASE CONTACT YOUR SUPPORT DEPARTMENT IN
  ORDER TO OPEN A REQUIREMENT FORM.
  INCIDENT DIAGNOSIS:
  Transformation features not selectable in
  specification tree.
  .
  DEVELOPMENT REQUEST JUSTIFICATION:
  To make changes in current behavior of CATIA a
  lot of enhancement is required.
  The new enhancement made would take into
  account all the transformation features.
  This enhancement cannot be done on the current
  levels due to compatibility issues.
  .
  ANSWER AND BY-PASS:
  The point corresponding to the transformation
  feature is selectable from the graphical area.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels