HD79733: THE STYLING FILLET COMMAND OF FREE STYLE WORKBENCH CREATES AN U NINTENTIONAL SHAPE

APAR status

• Closed as unreproducible in next release.

Error description

• The Styling Fillet command of Free Style
  workbench creates an unintentional shape
  Scenario:
  Scenario:
  Step1 Open the CATPart attached to the PMR
  Step2 Go to Free Style workbench.
  Step3 Select the Styling Fillet command.
  Step4 Select the Extrapol.1 as Support 1 and the
  Extrapol.2 as Support 2.
  Step5 Turn ON the Trim Support of Support 1 and
  Support 2.
  Step6 Input 10mm as Radius.
  Step7 Set the direction of arrows. Refer to ppt file.
  Step8 Click OK.
  Then, the shape is not correct.
  Additional information.
  The correct shape is created by Shape Fillet of GSD
  W/B.
  Expected result:
  The Styling Fillet command of Free Style
  workbench should create a
  correct shape.
  .
  

Local fix

Problem summary

• Scenario:
  1. Open the Generative Shape Design DATA containing two
  surfaces to be filleted
  2. Go to the Free Style workbench.
  3. Select the Styling Fillet command.
  4. Select the first Surface as Support 1 and the second
  surface as Support 2
  5. Turn ON the Trim Support of Support 1 and Support 2.
  6. Input any Radius.
  7. Set the direction of arrows to get a correct fillet.
  8. Click OK.
  The shape is not correct.
  Additional information.
  The correct shape is created with the Shape Fillet created
  inside the Generative Shape Design Workbench
  Expected result:
  The Styling Fillet command of Free Style Workbench should
  create a similar shape.
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
      CATIA VERSION V5R18.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION V5R18 SP8.
  CATIA VERSION V5R19 SP3.
  Additional Closure Information:
  Incident Diagnosis
  The Styling Fillet command of Free Style  workbench creates
  an unintentional shape
  Reason
  The Styling fillet is created correctly
  Bypass:
  Use the GSD fillet function to get the expected result.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R518 PSN

     UP