HD79425: DPM (MACHINE PROCESS PLANNER) / WRONG IPM PREVIEW FOR POCKETING MO WITH OFFSET ON ISLAND.

APAR status

• Closed as program error.

Error description

• DPM (Machine Process Planner) / Wrong IPM
  preview for pocketing MO with offset on island.
  .
  SCENARIO:
  1 - Use the provided settings (they configure the
  options for DPM Machining).
  2 - Run CATIA and open the provided CATProcess
  (pb40.CATProcess).
  3 - Go into the workshop "DPM Machining Process
  Planer".
  4 - Edit the pocketing operation (Pocketing.3).
  5 - Right click on the label "Island 1(5mm)"
  (pb40_image_001.jpg) and select "Offset on Island
  1" in the contextual menu.
  You can note it is defined with a value of 5mm.
  6 - Click on "Preview" button from the edited MO.
  The result is wrong (see pb40_image_002.jpg).
  .
  EXPECTED RESULT:
  The expected result should be the same as shown
  in file pb40_image_003.jpg.
  .
  .
  

Local fix

Problem summary

• DPM (Machine Process Planner) / Wrong IPM preview for pocketing
  MO with offset on island.
  DPM (Machine Process Planner) / Wrong IPM
  preview for pocketing MO with offset on island.
  .
  SCENARIO:
  1 - Use the provided settings (they configure the
  options for DPM Machining).
  2 - Run CATIA and open the provided CATProcess
  (pb40.CATProcess).
  3 - Go into the workshop "DPM Machining Process
  Planer".
  4 - Edit the pocketing operation (Pocketing.3).
  5 - Right click on the label "Island 1(5mm)"
  (pb40_image_001.jpg) and select "Offset on Island
  1" in the contextual menu.
  You can note it is defined with a value of 5mm.
  6 - Click on "Preview" button from the edited MO.
  The result is wrong (see pb40_image_002.jpg).
  .
  EXPECTED RESULT:
  The expected result should be the same as shown
  in file pb40_image_003.jpg.
  .
  .
  

Problem conclusion

• HIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP03.
  .
  Incident Diagnosis
  Wrong IPM preview for pocketing MO with offset on
  island
  Correction Explanation
  Island offset was not considered while generating
  the IPM. Island offset values are now read in the
  code and they used to generate IPM.
  Answer and By-Pass
  NO
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51903

     UP09/01/22 I 1000