HD78523: MACHINING (PMG) / MPA RECOGNIZES HOLES, IN FACE MODE, BUT FAILE D IN BODY MODE.

APAR status

• Closed as program error.

Error description

• Machining (PMG) / MPA recognizes Holes, in Face
  Mode, but failed in Body Mode.
  .
  SCENARIO:
  01 - Launch CATIA v5r18sp5
  02 - File + Open + Select the provided CATProcess
  03 - Global Feature Recognition in 'Body Mode',
  Select hole.
  04==>Recognition failed on message:
  Fill-Up Prismatic Machinable Features
  Failed in recognizing one or more machinable
  features.
  .
  Remark: Global Feature Recognition, in 'Face' Mode
  is able to recognize a lot of Holes.
  .
  EXPECTED RESULT:
  Holes should be recognized also in Body mode.
  .
  .
  

Local fix

Problem summary

• Machining (PMG) / MPA recognizes Holes, in Face Mode, but faile
  d in Body Mode.
  Machining (PMG) / MPA recognizes Holes, in Face
  Mode, but failed in Body Mode.
  .
  SCENARIO:
  01 - Launch CATIA v5r18sp5
  02 - File + Open + Select the provided CATProcess
  03 - Global Feature Recognition in 'Body Mode',
  Select hole.
  04==>Recognition failed on message:
  Fill-Up Prismatic Machinable Features
  Failed in recognizing one or more machinable
  features.
  .
  Remark: Global Feature Recognition, in 'Face' Mode
  is able to recognize a lot of Holes.
  .
  EXPECTED RESULT:
  Holes should be recognized also in Body mode.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP03 AND ON V5R18SP08
  .
  Incident Diagnosis
  Machining (PMG) / MPA recognizes Holes, in Face
  Mode, but failed in Body Mode.
  Correction Explanation
  While setting limits of the face sometimes it was set
  incorrectly so there was crash when recognize in
  Body Mode. In correction this is ensure that the
  limit of the face should be set correctly
  Answer and By-Pass
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN

     UP