HD78307: PARAMETERS FOR ISO3411 AND NOT BE DEFINED AS HUMAN MODEL S HOULDER PIVOT WIDTH CAN NOT BE DEFINED

APAR status

• Closed as Permanent restriction.

Error description

• ABSTRACT:PARAMETER FOR ISO3411 AND NOT BE
  DEFINED AS HUMAN MODEL SHOULDER PIVOT
  WIDTH CAN NOT BE DEFINED.
  Scenario:
  1.Open Product1.CATProduct.?The mode is defined
  to set parameters along ISO3411.Please refer
  ISO3411 standard.
  2.Change to Human Measurement Editor Wb, then
  select Manikin.
  3.Select Filter command, then select All.
  4.Select Displays the variable list, then select
  Bideltoid breadth.
  5.Set Manual as as management and 450mm as
  value.
  6.For ISO3411, one more parameter : Shoulder
  pivot width is required but there is no parameter in
  the list to define Shoulder pivot width.
  This is the problem.
  RESULT:Shoulder pivot width is required but there
  is no parameter in the list to define Shoulder pivot
  width.
  EXPECTED RESULT: Shoulder pivot width should be
  listed in the Parameter list by Display the variable
  list
  .
  

Local fix

Problem summary

• ABSTRACT:PARAMETER FOR ISO 3411 AND NOT BE
  DEFINED AS HUMAN
  MODEL SHOULDER PIVOT
  WIDTH CAN NOT BE DEFINED.
  Scenario:
  1.Open Product1.CATProduct.?The mode is defined
  to set
  parameters along ISO 3411.Please refer
  ISO 3411 standard.
  2.Change to Human Measurement Editor Wb, then
  select
  Manikin.
  3.Select Filter command, then select All.
  4.Select
  Displays the variable list, then select
  Bideltoid breadth.
  5.Set Manual as as management and 450mm as
  value.
  6.For ISO
  3411, one more parameter : Shoulder
  pivot width is required
  but there is no parameter in
  the list to define Shoulder
  pivot width.
  This is the problem.
  RESULT:Shoulder pivot
  width is required but there
  is no parameter in the list to
  define Shoulder pivot
  width.
  EXPECTED RESULT: Shoulder
  pivot width should be
  listed in the Parameter list by Display
  the variable
  list
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN CATIA
  Additional
  Closure Information:
  Additional Closure
  Information:
  RESTRICTION EXPLANATION
  The shoulder pivot width
  is not listed because all
  the joints position on our manikin
  model are
  calculated (estimated) based on external
  measurements (anthropometrical variables) so
  they cant be
  directly set or modify by the user
  1) Why CATIA does not
  refer ISO standard?
  A: our CATIA human model is built on 1988
  US
  Army Natick anthropometry database. The
  anthropometrical
  variables used in CATIA human
  model come from the database,
  so the
  measurement and definition of the anthropometry
  variable must be complained to the database rules.
  The
  anthropometry database of US army Natick
  was built based on
  the measurement of naked
  humans. Therefore, the manikin
  created with
  CATIA is a naked manikin without shoes, which is
  different from ISO standard. However, customers
  would be
  able to create a ISO standard manikin
  with knowing what
  exactly same variables being
  used in CATIA human model. I
  provided the
  answer in the attached document.
  2) What kind
  of anthropometrical variables CATIA
  refers?
  A: please refer
  to the attached PowerPoint
  document.
  3)How to apply CATIA
  Human model to ISO
  standard model application.
  A: To apply
  ISO standard to CATIA Human,
  customer could modify the value
  of the variable
  List I provided in the attached file to
  create A
  manikin (small, medium, or large operator)
  according to the data from ISO standard table.
  Please make
  sure they know the value of stature
  or height of ISO standard
  must minus 25mm (with
  shoes), then apply to the value of
  CATIA manikins
  stature, etc.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels