HD78022: SHEETMETAL DESIGN:OPEN DXF-FILE GENEREATED BY SMD DOES NOT SHOW ANY GEOMETRY.

APAR status

• Closed as unreproducible in next release.

Error description

• SHEETMETAL DESIGN:OPEN DXF-FILE
  GENEREATED BY smd DOES NOT SHOW ANY
  GEOMETRY.
  .
  SCENARIO:
  1. File+open-Part.CATPart
  2. Generative Sheet metal Design Workbench
  3. Save as DXF
  4)Part.dxf
  5)File+close
  6)File+open-Part.dxf =no geometry is shown in
  CATIA V5.
  .
  

Local fix

Problem summary

• SHEETMETAL DESIGN:OPEN DXF-FILE GENEREATED BY smd DOES NOT SHOW
  ANY GEOMETRY.
  SHEETMETAL DESIGN:OPEN DXF-FILE
  GENEREATED BY smd DOES NOT SHOW ANY
  GEOMETRY.
  .
  SCENARIO:
  1. File+open-Part.CATPart
  2. Generative Sheet metal Design Workbench
  3. Save as DXF
  4)Part.dxf
  5)File+close
  6)File+open-Part.dxf =no geometry is shown in
  CATIA V5.
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON CATIA
  VERSION 5 RELEASE 17.
  THIS PROBLEM IS NOT REPRODUCIBLE ON CATIA
  VERSION 5 RELEASE R20 and on V5 R19 SP02 and
  on V5 R18  SP07 LEVEL.
  Incident Diagnosis:
  SHEETMETAL DESIGN:OPEN DXF-FILE
  GENEREATED BY smd DOES NOT SHOW ANY
  GEOMETRY.
  .
  Additional Information:
  This problem was solved during DS internal testing
  and hence not reproducible on the latest versions.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX

• Fixed component ID

  569101000

Applicable component levels

• R518 PSN SP51807

     UP08/10/29 I 1000