HD77411: ASD : ERROR WHILE PERFORMING SAVE AS WITH SPECIFIC

APAR status

• Closed as unreproducible in next release.

Error description

• ASD : ERROR WHILE PERFORMING SAVE AS WITH
  SPECIFIC CATPRODUCT
  .
  Scenario:
  (1) Launch CATIA V5R18 SP3
  (2) Close any products/parts that open by default
  (3) Open "h078p2009-001 integration
  no.catproduct"
  (4) RMB the root product and go to "Properties"
  (5) Change the "Revision" from "-.024" to "2",
  hit "Apply", hit "OK"
  (6) File >> Save As... >> Create New Folder >>
  hit "Save" to save the data in this new folder
  (7) Note the Save is OK with no error messages
  (8) Launch CATIA V5R18 SP6
  (9) Repeat steps two (2) thru six (6)
  (10) Note the "Save As" fatal error dialog box that
  pops up. This is the problem.
  EXPECTED RESULT:
  (1) The data should get saved to disk without
  incident.
  .
  .
  

Local fix

Problem summary

• ASD : ERROR WHILE PERFORMING SAVE AS WITH SPECIFIC
  CATPRODUCT
  ASD : ERROR WHILE PERFORMING SAVE AS WITH
  SPECIFIC CATPRODUCT
  .
  Scenario:
  (1) Launch CATIA V5R18 SP3
  (2) Close any products/parts that open by default
  (3) Open "h078p2009-001 integration
  no.catproduct"
  (4) RMB the root product and go to "Properties"
  (5) Change the "Revision" from "-.024" to "2",
  hit "Apply", hit "OK"
  (6) File >> Save As... >> Create New Folder >>
  hit "Save" to save the data in this new folder
  (7) Note the Save is OK with no error messages
  (8) Launch CATIA V5R18 SP6
  (9) Repeat steps two (2) thru six (6)
  (10) Note the "Save As" fatal error dialog box that
  pops up. This is the problem.
  EXPECTED RESULT:
  (1) The data should get saved to disk without
  incident.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON CATIA VERSION 5 RELEASE
  18.
  THIS PROBLEM IS NOT REPRODUCIBLE ON CATIA VERSION
  VERSION 5 RELEASE 20 GA LEVEL AND ON V5 R19 SP02
  Scenario reproduced on reported R18SP06 level. Scenario does
  not reproduce on above mentioned levels.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP