HD76906: PART:DRAFT ANALYSIS SHOWS OPPOSITE DIRECTION AND ANGLE THAN DE FINED IN DRAFT COMMAND.

APAR status

• Closed as documentation error.

Error description

• PART:DRAFT ANALYSIS SHOWS OPPOSITE
  DIRECTION AND ANGLE THAN  DEFINED IN DRAFT
  COMMAND.
  .
  SCENARIO:
  1) Start Catia
  Workbench-Part Design
  2) Open the V504502.CATPart.
  3) Perform the Draft Analysis.
  .
  PROBLEM:
  Draft analysis shows opposite angle and direction
  than those defined in draft command.
  This behavior is not mentioned in the
  Documentation.
  .
  

Local fix

Problem summary

• PART:DRAFT ANALYSIS SHOWS OPPOSITE DIRECTION AND ANGLE THAN  DE
  FINED IN DRAFT COMMAND.
  PART:DRAFT ANALYSIS SHOWS OPPOSITE
  DIRECTION AND ANGLE THAN  DEFINED IN DRAFT
  COMMAND.
  .
  SCENARIO:
  1) Start Catia
  Workbench-Part Design
  2) Open the V504502.CATPart.
  3) Perform the Draft Analysis.
  .
  PROBLEM:
  Draft analysis shows opposite angle and direction
  than those defined in draft command.
  This behavior is not mentioned in the
  Documentation.
  .
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN THE
  DOCUMENTATION DELIVERED WITH CATIA
  VERSION 5 RELEASE 20 GA LEVEL.
  NOTE THAT DOCUMENTATION WILL ALSO BE
  INCLUDED IN V5R19SP02.
  DOCUMENTATION REFERENCE:
  FreeStyle Shaper, Optimizer and Profiler / Basic
  Tasks / Analyzing curves and surfaces / Performing
  Draft Analysis
  .
  MODIFICATION:
  Following text has been added:
  "The pulling direction defined in a Part Design's
  Draft is not taken into account. In case of
  inconsistency with the draft analysis orientation,
  click Inverse."
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels