IBM Support

HD76310: MACHINING (NCINFRA) / FOR MACHINE DEFINATION IN PO THE SEQUENCE OF SPINDLE AXIS IS WRONG.

Subscribe

You can track all active APARs for this component.

 

APAR status

  • Closed as program error.

Error description

  • Machining (NCInfra) / For machine defination in PO
the sequence of spindle axis is wrong.
.
SCENARIO:
1. Open the provided CATProcess.
2. Double click PO.
3. Click on machine & select 5Axis..
4. Go to Spindle TAB
Results: Axes orientation for the spindle of any
selected machine is listed out of established order
as K, J, I
Note: 3-Axis Spindle, 4-Axis Spindle, and Lathe
Turret displays the same results.
.
EXPECTED RESULT:
Axes orientation of the spindle for the selected
machine should be listed in sequence as I, J, K.
.
.

Local fix

  • 



Problem summary


    

  • Machining (NCInfra) / For machine defination in PO the sequence
of spindle axis is wrong.
Machining (NCInfra) / For machine defination in PO
the sequence of spindle axis is wrong.
.
SCENARIO:
1. Open the provided CATProcess.
2. Double click PO.
3. Click on machine & select 5Axis..
4. Go to Spindle TAB
Results: Axes orientation for the spindle of any
selected machine is listed out of established order
as K, J, I
Note: 3-Axis Spindle, 4-Axis Spindle, and Lathe
Turret displays the same results.
.
EXPECTED RESULT:
Axes orientation of the spindle for the selected
machine should be listed in sequence as I, J, K.
.
.

    



Problem conclusion


    

  • THIS PROBLEM WILL BE FIXED ON CATIA VERSION
5 RELEASE 20 GA LEVEL.
Incident Diagnosis
Machining (NCInfra) / For machine defination in PO
the sequence of spindle axis is wrong.
.
Correction Explanation
the order of the parameters is reversed.
Code has been corrected to show the correct UI.
.
Answer and By-Pass
none
.
Additional Information: NOTE THAT THIS PROBLEM
WILL ALSO BE FIXED ON V5 R19 SP2.
.

    



Temporary fix


    

  • 



Comments


    

  • 



APAR Information




    

  • APAR number
    HD76310
    • 

  • Reported component name
    CATIA V5 NT>XP
    • 

  • Reported component ID
    569151000
    • 

  • Reported release
    518
    • 

  • Status
    CLOSED  PER
    • 

  • PE
    NoPE
    • 

  • HIPER
    NoHIPER
    • 

  • Special Attention
    NoSpecatt
    • 

  • Submitted date
    2008-07-18
    • 

  • Closed date
    2008-09-01
    • 

  • Last modified date
    2008-11-07
    • 





    

  • APAR is sysrouted FROM one or more of the following:
    

    • 

  • APAR is sysrouted TO one or more of the following:
    

    • 



Fix information


    

  • Fixed component name
    CATIA V5 NT>XP
    • 

  • Fixed component ID
    569151000
    • 



Applicable component levels


    

  • R519  PSN  SP51902
       UP08/11/07  I  1000
    • 








      
              
                            

              

              [{"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Product":{"code":"SSVJ2K","label":"CATIA"},"Component":"","ARM Category":[],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"518","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
              

                                                                    

          
 
        

      

    

      

        

          

            
Document Information


            

            


                        

            Modified date:
            

            07 November 2008
            

            
                      

        


        

        


      

    

  



    

  

  
    
            

          
Page Feedback